NefMoto > Technical > Cluster and Immobilizer > ECU EEPROM images (Moderator: ddillenger) > 1J0920906K IMMO OFF
Pages: [1]
« previous next »
Author Topic: 1J0920906K IMMO OFF  (Read 7067 times)
Speedwerks
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: May 14, 2021, 10:38:13 AM »
have a  03.01 vr6 auto car. originial cluster died, i cannot pull skc. donor cluster is a
1j0920906K. immo3 from my understanding?

does anyone have an eeprom file for this cluster with IMMO off that i can just upload
the bin files to my cluster via Commander K+Can?
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #1 on: May 14, 2021, 11:17:45 AM »
its not the bin file u need..u need the 95040 file from ECU to immo off...try using vag k on ECU to get pin
Logged
Speedwerks
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #2 on: May 14, 2021, 11:46:51 AM »
When I used K+Can to log into ECU- it doesn’t give me a Login. Only displays a ‘0’ Value.

I get time out errors trying to read it.
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #3 on: May 14, 2021, 11:56:10 AM »
how ar u reading it me7 and which pattern 01 or 11
Logged
Speedwerks
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #4 on: May 14, 2021, 03:25:05 PM »
Quote from: stuydub on May 14, 2021, 11:56:10 AM
how ar u reading it me7 and which pattern 01 or 11

Using Commander K+Can on K-Line.
Both patterns 01/11 do the same.

Only one that lets me actually connect is the 01 Test, but when I try to turn IMMO off it times out.
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #5 on: May 15, 2021, 05:18:42 AM »
YOU DONT IMMO WITH VAG K COMMANDER...THATS ONE OF THE DUMBEST MOVES YOU CAN DO...

You have the cable
You need a BENCH HARNESS or BREAKOUT cable
You need to BOOTMODE..(LEARN)
You need to create a IMMO OFF FILE using the software on this forum
You need to write the file in BOOT MODE making sure CHECKSUMS are correct...

USE THIS
http://nefariousmotorsports.com/forum/index.php?action=search
Logged
Speedwerks
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #6 on: May 16, 2021, 08:20:41 PM »
Quote from: stuydub on May 15, 2021, 05:18:42 AM
YOU DONT IMMO WITH VAG K COMMANDER...THATS ONE OF THE DUMBEST MOVES YOU CAN DO...

You have the cable
You need a BENCH HARNESS or BREAKOUT cable
You need to BOOTMODE..(LEARN)
You need to create a IMMO OFF FILE using the software on this forum
You need to write the file in BOOT MODE making sure CHECKSUMS are correct...

USE THIS
http://nefariousmotorsports.com/forum/index.php?action=search



LOL. Funny others have had success doing so
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #7 on: May 17, 2021, 12:23:05 AM »
You cant immo off with vag k commander unless its a EDC15 and then it still has checksum fault ...
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #8 on: May 17, 2021, 12:26:14 AM »
Quote from: Speedwerks on May 16, 2021, 08:20:41 PM
LOL. Funny others have had success doing so

Here have a read..
http://nefariousmotorsports.com/forum/index.php?topic=89.0
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 02:32:40 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)