Pages: [1]
Author Topic: LC/NLS B_kuppl B_Br switch  (Read 4208 times)
IAmAnEngineer
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 15


« on: July 30, 2021, 10:39:39 AM »

Hi,
a friend of mine has a Audi A4 B5 with 2.4 V6.
Ecu is: 3B0907552

B_Kuppl and B_Br are both stored in 0x00FD58 => 2C

Because it has automatic transmission and launch is only needed for fun, I replaced both occurrences of B_kuppl-bitmask with B_Br-bitmask in the code.
Additionally, I set the NLS RPM to 8000 - just in case, not needed in an automatic.

But after modification, launch is still not working.  Huh
Both brake pedal switch and coolant sensor are working, I double checked them.

Can anyone tell me, why it is not working?
Logged
Blazius
Hero Member
*****

Karma: +95/-46
Offline Offline

Posts: 1291



« Reply #1 on: July 30, 2021, 11:51:30 AM »


Additionally, I set the NLS RPM to 8000


wat
Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Offline Offline

Posts: 3008



« Reply #2 on: July 30, 2021, 12:19:50 PM »

wat
he disabled it as its an auto and its doesnt need it
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
IAmAnEngineer
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 15


« Reply #3 on: July 31, 2021, 03:42:06 AM »

he disabled it as its an auto and its doesnt need it
Exactly
Logged
IAmAnEngineer
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 15


« Reply #4 on: August 07, 2021, 01:07:15 PM »

Noone?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.598 seconds with 16 queries. (Pretty URLs adds 0.00099999999999989s, 0q)