Pages: [1]
Author Topic: Bench flash Euro spec Audi S4 B5 how to find Pin24?  (Read 2449 times)
jahappz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: August 24, 2021, 10:51:07 AM »

Im looking into putting my eurospec Audi S4 B5 ECU (8D0907551) into bootmode and looked into some guides here for the NA model with the 800BB chip and wanted to know where pin 24 (or easier point to ground?) is located on the 400BB chip?


Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #1 on: August 24, 2021, 02:22:35 PM »

Same as on 800 bb. Pin 24
Logged
jahappz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: August 25, 2021, 12:52:02 PM »

Same as on 800 bb. Pin 24

Thanks, when putting the unit in boot mode i get "ECU data not found" but i can read the data (8D0907551 ECU) to a bin file but when i open it in tunerpro with a 8D0907551C.xdf

As i couldn't read the ECU data in boot mode can i use the 800BB here (i do have a 400BB chip)?


Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: August 25, 2021, 08:18:13 PM »

Why are you using bootmode? And why read a stock file?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 15 queries. (Pretty URLs adds 0s, 0q)