Pages: [1]
Author Topic: Help New guy ... not finding cable  (Read 2077 times)
Markmarky0
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: September 02, 2021, 02:15:24 AM »

Hi guys I'm new here I've built a bench and I've installed all the software etc ... I'm struggling to 1. Reprgram the serial on my 232r cable 2. Have galleto register the cable is there at all.It won't recognise it atm. I'm using hxd to find the serial and m prog to program it .. however on the how to in hxd it has a long list of codes etc and I can't find out how to get to the list ... I can't find the correct line where the serial is located ! Help is appreciated
« Last Edit: September 02, 2021, 02:26:05 AM by Markmarky0 » Logged
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 191


« Reply #1 on: September 02, 2021, 03:45:00 AM »

http://nefariousmotorsports.com/forum/index.php?topic=3088.0title=
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)