Pages: [1]
Author Topic: Me 7.5 06A906032sg crossflash?  (Read 3373 times)
Rossi88
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« on: September 07, 2021, 11:21:43 PM »

Hi guys I have an octavia aum mk1 150hp  I would like to know if I can crossflash my maps ecu:06a906032sg 369039 with the maps of octavia rs auq 180hp ecu:06a906032sj 369040?
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #1 on: September 08, 2021, 11:13:09 AM »

Hi guys I have an octavia aum mk1 150hp  I would like to know if I can crossflash my maps ecu:06a906032sg 369039 with the maps of octavia rs auq 180hp ecu:06a906032sj 369040?
Some software versions can cross flash without an issue, some have issues. 2 known potential issues you may wanna check on, immo generation, and eeprom compatibility. If all is a match and / or compatible, it will cross flash without an issue. bare in mind, if you flash the wrong generation immo file to your ecu the car will start and instantly shut off, and you will not be able to recover with nefmoto as "immo not authenticated" will keep it from flashing. The best solution is to take the maps from the 180, and transfer them to your 150 file. If you poke around the forum a little bit youll find a some threads covering this. My 2c on the topic would be make sure you at least have a recovery option for when you brick your ecu.       
Logged

Giving your mom a tuneup
Rossi88
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« Reply #2 on: September 08, 2021, 02:16:56 PM »

Thanks for answer mate,I tried the same number ecu 06A906032sg from seat Leon without success.The car didn’t start.I tried and 06A906032Hn from Seat Leon,no problem with the flash but again engine didn’t start.No compability with immo.With what program can I copy the maps from one file to an other ?
Logged
Rossi88
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« Reply #3 on: September 09, 2021, 05:29:34 AM »

Anyone have the xdf file for this ecu?
Logged
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47


« Reply #4 on: October 01, 2021, 07:03:28 AM »

06A906032MJ looks similar, check it mabye it works on your ecu
Logged
Rossi88
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« Reply #5 on: October 01, 2021, 01:49:24 PM »

06A906032MJ looks similar, check it mabye it works on your ecu
can you attach the xdf file? Or sent the post of the topic because I can’t find it?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)