Pages: [1]
Author Topic: Alternative Tools for Boot Mode?  (Read 2360 times)
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1604


« on: September 12, 2021, 08:08:27 AM »

Hi,

I found some old threads from 10+ years ago about kwp2000plus and me7 flasher amt cartech.
Is this just a early mpps clone or some other tool? What software is on the screen?

http://nefariousmotorsports.com/forum/index.php?topic=670.msg9641#msg9641

In general, is there any tool besides old galletto, which allows you to boot by hand and write a me7.1/me7.5 based on a ftdi cable?

Logged
jahko
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 47


« Reply #1 on: September 12, 2021, 09:12:24 AM »

I've got one but never really used it, its just a really simple serial comms port and came with its own software iirc, can't remember if it's ftdi or not but will dig it out
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Online Online

Posts: 1466


mk4 1.8T AUM


« Reply #2 on: September 12, 2021, 12:48:51 PM »

Chiploader works with bootmode with me7 and ftdi kkl cable

Its shareware but you can find 'free' version on torrents or buy one
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #3 on: September 13, 2021, 08:25:30 AM »

Hi,

I found some old threads from 10+ years ago about kwp2000plus and me7 flasher amt cartech.
Is this just a early mpps clone or some other tool? What software is on the screen?

http://nefariousmotorsports.com/forum/index.php?topic=670.msg9641#msg9641

In general, is there any tool besides old galletto, which allows you to boot by hand and write a me7.1/me7.5 based on a ftdi cable?



Flex works Smiley not sure you wanted to hear that. flashes in like 12 seconds
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1604


« Reply #4 on: September 13, 2021, 11:35:18 AM »

i own flex, not sure if you wanted to hear that

is there a english version of chiploader or a menu to change language?
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Online Online

Posts: 1466


mk4 1.8T AUM


« Reply #5 on: September 13, 2021, 01:49:28 PM »

seems like only russian available

but its pretty easy to use
go to the настройки (options; hammer icon.. idk if you see russian words or not on your laptop)
select com-port, run test Kline button then ok
now go to me7 page and click установить связь top button at the right side menu with ecu prepared to bootmode (ground wire etc)
progress bar should run few secs and then itll be ready to read flash (считать flash; second button) or to write flash ( загрузить flash 4th button)
if everything is fine you should see the progress with the current operation offset
app uses buffer to store current flash (буфер; buffer page at the bottom)
so after flash was succesfully readed just click save button to save buffer to file
same for writing. open flash file with open button; it loads to buffer and then click write flash (2nd button)

eeprom functions doesnt work for me here
« Last Edit: September 13, 2021, 03:30:28 PM by fukenbroken » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)