Pages: [1] 2
Author Topic: 8N0906018AB Bosch ME 7.5 burbles  (Read 1108 times)
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« on: September 19, 2021, 03:52:35 AM »

Hello,
this is my first post sorry if I post it in the wrong threat or something.

I got a Audi TT mk1 with Bosch ME 7.5 8N0906018AB, and I got a XDF from a fellow member on the forum, but its missing some parts, and I was hoping someone could help me adding them to the file..?

Im looking for:
KFNWEGM
KFTVSA

My goal is for some nice burbles when decell, and occasionally a pop on high refs.

Logged
Sandstorm3k
Sr. Member
****

Karma: +7/-7
Offline Offline

Posts: 292


Leon 1M 1.8T AUQ


« Reply #1 on: September 19, 2021, 12:38:54 PM »

Don't use KFNWEGM use KFTVSA instead

Attach your binary i'll sort you out with KFTVSA
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #2 on: September 19, 2021, 02:33:58 PM »

Don't use KFNWEGM use KFTVSA instead

Attach your binary i'll sort you out with KFTVSA

I will attach my BIN, but I am curious, do you have a XDF with KFTVSA included? Or do you use winOLS?
Im very curious by nature, so I always wanna check what has been done so I can learn from it.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #3 on: September 19, 2021, 02:39:42 PM »

Don't use KFNWEGM use KFTVSA instead

Attach your binary i'll sort you out with KFTVSA

Also try not to go too crazy, it still has the stock CAT in it, only has a muffler delete ATM. In the upcomming years I want to go full 3" with 200 cell CAT and a muffler.
Logged
sda2
Jr. Member
**

Karma: +14/-0
Offline Offline

Posts: 38


« Reply #4 on: September 19, 2021, 04:40:13 PM »

Attached Damos, KP and XDF. Simple conversion, will contain some bugs propably.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #5 on: September 20, 2021, 02:27:11 PM »

Attached Damos, KP and XDF. Simple conversion, will contain some bugs propably.

Thank you so much for the time and effort! What kind of bugs are you talking about exactly? Could it mess anything up if I make changes and upload the map?
Logged
Sandstorm3k
Sr. Member
****

Karma: +7/-7
Offline Offline

Posts: 292


Leon 1M 1.8T AUQ


« Reply #6 on: September 20, 2021, 02:42:46 PM »

I will attach my BIN, but I am curious, do you have a XDF with KFTVSA included? Or do you use winOLS?
Im very curious by nature, so I always wanna check what has been done so I can learn from it.

It is very easy to find

I like using a well defined map preferably one that's very similar to your car, all we need to do to find these maps is look at the address of the one that is defined, then we look for this map in raw hex. It's probably not the best, fastest or most efficient but usually works for such an easy map.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #7 on: September 20, 2021, 02:57:28 PM »

It is very easy to find

I like using a well defined map preferably one that's very similar to your car, all we need to do to find these maps is look at the address of the one that is defined, then we look for this map in raw hex. It's probably not the best, fastest or most efficient but usually works for such an easy map.

Interesting..!
Am looking forward to see what u did with the map I send you
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #8 on: September 20, 2021, 03:11:37 PM »

Just making sure I got this right. This is the table I get from KFTVSA, the values look fine, but I wanna confirm they are with you guys.

The values are milliseconds  right? So the value 0.2000 is 2 seconds?

Logged
Sandstorm3k
Sr. Member
****

Karma: +7/-7
Offline Offline

Posts: 292


Leon 1M 1.8T AUQ


« Reply #9 on: September 20, 2021, 03:53:53 PM »

If that's stock that can't possibly be the right address

I think it might be 0x199EF but i can't be sure if a value of 0.61 is correct. I've never worked on these TT's, but i do know KFTVSA values can differ between different binaries.

0.2 would mean 0.2 seconds - max value would be 2.55 seconds.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #10 on: September 21, 2021, 03:09:53 AM »

If that's stock that can't possibly be the right address

I think it might be 0x199EF but i can't be sure if a value of 0.61 is correct. I've never worked on these TT's, but i do know KFTVSA values can differ between different binaries.

0.2 would mean 0.2 seconds - max value would be 2.55 seconds.

When I bought the car, the prev owner did mention it might have been tuned by some owner in the past, but he never had evidence. I did notice it makes about 200HP on the crank acording to VCDS logs, but I dont see why they would change KFTVSA for a stage 1 tune, since there where never pops/burbles added.
Logged
Sandstorm3k
Sr. Member
****

Karma: +7/-7
Offline Offline

Posts: 292


Leon 1M 1.8T AUQ


« Reply #11 on: September 21, 2021, 03:58:22 AM »

When I bought the car, the prev owner did mention it might have been tuned by some owner in the past, but he never had evidence. I did notice it makes about 200HP on the crank acording to VCDS logs, but I dont see why they would change KFTVSA for a stage 1 tune, since there where never pops/burbles added.
Compare your file to stock and you'll find out  Smiley

Also, while you're on here, might aswell start from a stock file and DIY. Read the stage 1 community thread and s4wiki.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #12 on: September 21, 2021, 04:23:43 AM »

Compare your file to stock and you'll find out  Smiley

Also, while you're on here, might aswell start from a stock file and DIY. Read the stage 1 community thread and s4wiki.

What do normal kftvsa maps look like? I cant realy find a good reference for data.
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #13 on: September 21, 2021, 05:41:08 AM »

What do normal kftvsa maps look like? I cant realy find a good reference for data.

nvm just found it with the damos pack which was send before.. i kept trying to import the DAM file, but had to import the KP file.

Its located at 1944E
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #14 on: September 21, 2021, 11:11:37 AM »

Compare your file to stock and you'll find out  Smiley

Also, while you're on here, might aswell start from a stock file and DIY. Read the stage 1 community thread and s4wiki.

Seems like they are both the same. I changed the value to 2.5500 at 2000 - 6600 RPM (on the bottom row, 80.25 C) but its not doing anything on decel. I still have to do it manualy with my foot by pressing it slightly..

I even tried the map you suggested where all the values where around 0.61, but with same result.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.117 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)