NefMoto > Technical > Flashing and Chipping > Flashing TCU
Pages: [1]
« previous next »
Author Topic: Flashing TCU  (Read 7625 times)
_Adrian_
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 11
« on: May 22, 2012, 10:35:50 AM »
Is this possible with this process ??
I do believe that it is connected through the CAN bus and would be worthwhile over GIAC Tip Chip as a DIY Solution
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83
« Reply #1 on: June 03, 2012, 10:45:33 AM »
Would also like to know this  Grin
Logged
arson-panda
Newbie
*

Karma: +4/-0
Offline Offline

Posts: 22
« Reply #2 on: May 14, 2013, 07:47:10 AM »
I'm still soldering these, I think it's too rare and old for any tool developers to work on now.
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83
« Reply #3 on: May 14, 2013, 07:52:07 AM »
Quote from: arson-panda on May 14, 2013, 07:47:10 AM
I'm still soldering these, I think it's too rare and old for any tool developers to work on now.

So you have a programming tool, flash a new chip and then solder it in?

IIRC GIAC was actually doing it this way for a while as well
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040
« Reply #4 on: May 14, 2013, 08:01:32 AM »
Quote from: arson-panda on May 14, 2013, 07:47:10 AM
I'm still soldering these, I think it's too rare and old for any tool developers to work on now.

+1
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
AARDQ
Sr. Member
****

Karma: +11/-0
Offline Offline

Posts: 338
« Reply #5 on: May 14, 2013, 08:32:53 AM »
Nefmoto tool connects just fine (address 02) but navigating security was beyond me.
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83
« Reply #6 on: May 14, 2013, 10:18:26 AM »
Quote from: AARDQ on May 14, 2013, 08:32:53 AM
Nefmoto tool connects just fine (address 02) but navigating security was beyond me.
Innnnteresting, i'll have to try it for S&G's
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040
« Reply #7 on: May 14, 2013, 03:08:44 PM »
The fact that it connects means absolutely nothing besides the fact that the TCU obviously speaks KWP1281.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83
« Reply #8 on: May 30, 2013, 12:15:20 PM »
Quote from: prj on May 14, 2013, 03:08:44 PM
The fact that it connects means absolutely nothing besides the fact that the TCU obviously speaks KWP1281.

As I found out LOL

Which makes perfect sense.

For me the TCU is integrated inside the trans so there is no way that I know of to unsolder/program/resolder

Oh well fun thought LOL
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 08:03:12 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)