Hello. First post here. I’ve been looking for answers since yesterday afternoon with no success. My problem is.. I’m and idiot and windows 10 is as well. I pulled my stock bin and attempted to flash a immo off bin. Well I forgot to change the pin in the new file and windows 10 decided after it updated that I didn’t need any of the files I saved. So my issue is the bin currently written to the immo does not have my pin. And I don’t have the file that has my pin. How do I fix this and get my car running again?

upload your cluster dump and eprom from ECU , I can transfer Immo data with a hex editor

okay, so I think I figured out what I did wrong. I'm going to be making a bench harness in the next day or 2 so I can load into boot mode. Will the shitty ebat cable I bought work for this or will I need a new one? My cable works for reading and writing in car with the nefmoto flasher. I think I need to do this because I can't even talk to my ecu now that the immo is active. will give ecu eprom when I can get into the ecu. Currently on my cluster is a virgin file.

The last thing I tried before posting was a virgin file said to be for my car.

I don't know what it is but it's definitely not an eeprom

Here is the full read of my ecu from galletto. Hopefully I at least did this part right. xD my ecu is a 4B0 907 551 AK