Seems like I bricked 95160

Pages: [1]

« previous next »

Author

Topic: Seems like I bricked 95160 (Read 2648 times)

borderm3

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Seems like I bricked 95160 « on: December 06, 2021, 02:18:16 PM »

Hi All,

I think I bricked a 95160 trying to write it with a clip without desoldering. Yes, lazy...

I have since tried reading it with an adapter and by soldering to adapter directly in zif socket. Using a vvdi prog. I pulled a ST 93C86 out of an MS43 and was able to read and write and read that just fine. Therefore, I believe my vvdi prog is operational.

Will this 95160 chip work properly?

https://www.digikey.com/en/products/detail/stmicroelectronics/M95160-DRMN3TP-K/4729254?s=N4IgjCBcpgbFoDGUBmBDANgZwKYBoQB7KAbRACYBOAFkvIA4QBdAgBwBcoQBldgJwCWAOwDmIAL4FyAVnIIQySOmz4ipCmHLUA7JWZtOkHv2FjJFbfGgLUmXAWKQysMAGZX1fSA5deg0RIE9AAMwfKKyvZqThTBAAQAsgASAF5ePkYAqkIC7ADyKAk4aFgArnw4geBUENYRdqqOZFS05PAs3obG-mYEYJT0enW2Kg7qYR0Z3aZV5MHUcsNKDWMx5AzB2oyTXX4z5gC0tUgjUU0gtNrMh55LkY3qrpRgwe3i5otklNJwE%2BJAA


	Logged

borderm3

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Re: Seems like I bricked 95160 « Reply #1 on: December 06, 2021, 09:13:47 PM »

This an me7.1 in a 2005 new beetle 5 cylinder


	Logged

borderm3

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Re: Seems like I bricked 95160 « Reply #2 on: December 08, 2021, 12:22:33 PM »

So I got M95160-DRMN3TP/K from digikey.

I am able to read it and write a blank bin but it anytime I try to write a non blank bin I get 'Write Error(00)'. Does anyone know if perhaps these are write protected or something? I suspect my VVDI Prog should be able to write any ST 95160 not just the exact ones that came in the ECU's?

TIA


	Logged

borderm3

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Re: Seems like I bricked 95160 « Reply #3 on: December 08, 2021, 12:42:58 PM »

If I do a verify, I get a 'check failure'. Perhaps the checksum is different for these two chips? In over my head here, anyway to correct it to make it work?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Seems like I bricked 95160 « Reply #4 on: December 09, 2021, 02:24:11 AM »

Do you tried to access this eeprom while on the pcb?

http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

or ktag


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 08:55:25 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search