Pages: [1]
Author Topic: Seems like I bricked 95160  (Read 744 times)
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« on: December 06, 2021, 02:18:16 PM »

Hi All,

I think I bricked a 95160 trying to write it with a clip without desoldering.  Yes, lazy...

I have since tried reading it with an adapter and by soldering to adapter directly in zif socket.  Using a vvdi prog.  I pulled a ST 93C86 out of an MS43 and was able to read and write and read that just fine.  Therefore, I believe my vvdi prog is operational.

Will this 95160 chip work properly?

https://www.digikey.com/en/products/detail/stmicroelectronics/M95160-DRMN3TP-K/4729254?s=N4IgjCBcpgbFoDGUBmBDANgZwKYBoQB7KAbRACYBOAFkvIA4QBdAgBwBcoQBldgJwCWAOwDmIAL4FyAVnIIQySOmz4ipCmHLUA7JWZtOkHv2FjJFbfGgLUmXAWKQysMAGZX1fSA5deg0RIE9AAMwfKKyvZqThTBAAQAsgASAF5ePkYAqkIC7ADyKAk4aFgArnw4geBUENYRdqqOZFS05PAs3obG-mYEYJT0enW2Kg7qYR0Z3aZV5MHUcsNKDWMx5AzB2oyTXX4z5gC0tUgjUU0gtNrMh55LkY3qrpRgwe3i5otklNJwE%2BJAA
Logged
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #1 on: December 06, 2021, 09:13:47 PM »

This an me7.1 in a 2005 new beetle 5 cylinder
Logged
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #2 on: December 08, 2021, 12:22:33 PM »

So I got M95160-DRMN3TP/K from digikey.

I am able to read it and write a blank bin but it anytime I try to write a non blank bin I get 'Write Error(00)'.  Does anyone know if perhaps these are write protected or something?  I suspect my VVDI Prog should be able to write any ST 95160 not just the exact ones that came in the ECU's?

TIA
Logged
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #3 on: December 08, 2021, 12:42:58 PM »

If I do a verify, I get a 'check failure'.  Perhaps the checksum is different for these two chips?  In over my head here, anyway to correct it to make it work?
Logged
aef
Hero Member
*****

Karma: +59/-39
Offline Offline

Posts: 1396


« Reply #4 on: December 09, 2021, 02:24:11 AM »

Do you tried to access this eeprom while on the pcb?

http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

or ktag
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)