Pages: [1]
Author Topic: Requested boost too low on low RPM  (Read 2371 times)
roman_tyk
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 87


« on: December 13, 2021, 06:30:51 AM »

hello folks,

Could someone check why my boost request is around 1.35b instead of 1.5 starting from 3000rpm?
I have HW setup prepared for 600hp with rs6 hybrid turbos, i want to request 1.55 from 3prm to 7rpm.
Currently something is blocking 3-4k rpm my load request. I don't know which map

Added IOP/IRL/LDRXN map in attachament and me7logs.

Thanks in advance.
Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 156


« Reply #1 on: December 13, 2021, 06:40:35 AM »

hello folks,

Could someone check why my boost request is around 1.35b instead of 1.5 starting from 3000rpm?
I have HW setup prepared for 600hp with rs6 hybrid turbos, i want to request 1.55 from 3prm to 7rpm.
Currently something is blocking 3-4k rpm my load request. I don't know which map

Added IOP/IRL/LDRXN map in attachament and me7logs.

Thanks in advance.
What is with your KFMIRL?


Gesendet von iPhone mit Tapatalk
Logged
roman_tyk
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 87


« Reply #2 on: December 13, 2021, 07:17:59 AM »

What is with your KFMIRL?


Gesendet von iPhone mit Tapatalk

what you mean? irl max value 247, LDRXn starting from 2500rpm 239.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #3 on: December 13, 2021, 08:29:19 AM »

Looks like this isn't 5120. So not much else to discuss here.
You also don't understand IRL/IOP. Have fun with your timing intervention.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
roman_tyk
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 87


« Reply #4 on: December 13, 2021, 08:53:57 AM »

Looks like this isn't 5120. So not much else to discuss here.
You also don't understand IRL/IOP. Have fun with your timing intervention.


don't need 5120 to run 1.5bar (boost on map sensor line).
IRL/IOP conversion comes from me7 wizard tune, those are not random values Smiley

LDRXNs adjusted only for tests. I will check LDPBN and LDORXN and corresponding maps.

Thanks.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #5 on: December 13, 2021, 10:34:03 AM »

don't need 5120 to run 1.5bar (boost on map sensor line).
If you say so. Why do you care about request then? As the PID can't work anyway. Turn it off and then it doesn't matter what the request is, problem solved, right?

Quote
IRL/IOP conversion comes from me7 wizard tune, those are not random values Smiley
Useless tool if it generates these values. It's not inverse.

Looks like you got it all figured out here though.
So why you posting here?
« Last Edit: December 13, 2021, 10:36:46 AM by prj » Logged

PM's will not be answered, so don't even try.
Log your car properly.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #6 on: December 13, 2021, 12:57:37 PM »

If you wanna use a tool use use Kaleb's one its much newer and better than masterjs old excel file https://github.com/KalebKE/ME7Tuner
but first of all try going thru the wiki / fr a few more times to understand the relation between IOP and IRL else like prj said or your timing will look like a sawblade.

Running on sensor/ps_w edge is bad idea.
Logged
Imho
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 27


« Reply #7 on: December 14, 2021, 05:56:40 AM »

If you wanna use a tool use use Kaleb's one its much newer and better than masterjs old excel file https://github.com/KalebKE/ME7Tuner

Running on sensor/ps_w edge is bad idea.

tool does not work at least for me, when i try next tabs it hangs..

but the problem seems to be with low rpm range as @Roman mention and its far from MAP edge, running with 5120 would be better, but seems the problem is with IRL/IOP
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #8 on: December 14, 2021, 06:28:03 AM »

IOP and IRL else like prj said or your timing will look like a sawblade.

someone has an example log for this sawblade style timing?
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #9 on: December 14, 2021, 09:03:24 AM »

Hfm
Logged
roman_tyk
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 87


« Reply #10 on: December 14, 2021, 11:51:37 AM »

IOP and IRL

not sure about this. Tested few irl/iop maps. Still no luck with load request around 1.5b at 3-3.5krpm.
I have 4z7551N maybe this sw version need some additional tricks.
I need to have most problematic functions in me7 disabled to achieve flat boost and timing (to get 600-900ps)
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #11 on: January 14, 2022, 07:34:02 PM »

I need to have most problematic functions in me7 disabled to achieve flat boost and timing (to get 600-900ps)
Disable yourself  Grin

But on more serious note, you need 5120 to get anywhere close to those power ranges. Or just yolo underscale MAF and open loop boost.
You also need a built engine.

I wish you luck though. You don't seem to understand anything at all - not even how to make a Stage 1 tune, and you are trying to do a lot more complex shit than that.
Btw it's no difference if you run 1.5 bar or 2.5 bar, it's all the same to the ECU since it can't control anything anyway. So does not matter what request is, CWMDAPP to 8 and go nuts.
« Last Edit: January 14, 2022, 07:36:16 PM by prj » Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.046 seconds with 16 queries. (Pretty URLs adds 0s, 0q)