Pages: [1]
Author Topic: 2007 VW New Beetle ME7.1.1 No ECU - How do I make use of used ECU  (Read 3207 times)
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29



This is basically a distilled down version of where I got with another question in the flashing and chipping section.  I felt like perhaps its better suited in this area.

I currently have a 2007 VW New Beetle whereby we do not have the original ECU from the vehicle.  How do I go about making another ME7.1.1 work in this vehicle.

TIA!!!! Hugs, Kisses, and ass slaps.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #1 on: December 18, 2021, 07:19:13 AM »

Like you would any other vag ecu... What makes this any different? Also, do you just NOT like following forum protocol or are you just that dense? All the answers are in the stickies, so let start another worthless thread asking  for handouts.  Cheesy
Logged

Giving your mom a tuneup
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #2 on: December 18, 2021, 10:14:21 AM »

I didnt see any sticky in this section that is labeled to be applicable.  Unless MKIV is the same as New Beetle?

If you don’t mind taking a moment out of your busy day full of negativity and control issues, could you please link me the sticky that solves me problem.  XOXO and Merry Christmas!!!!
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #3 on: December 18, 2021, 12:04:19 PM »

I didnt see any sticky in this section that is labeled to be applicable.  Unless MKIV is the same as New Beetle?

If you don’t mind taking a moment out of your busy day full of negativity and control issues, could you please link me the sticky that solves me problem.  XOXO and Merry Christmas!!!!
Read the eeprom flip 4 bits and write back to the eeprom. It's no different than any other vag me7 ecu.
Logged

Giving your mom a tuneup
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #4 on: December 18, 2021, 01:10:12 PM »

If you could, please link the sticky you were referring to.

Thanks.
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #5 on: December 18, 2021, 02:53:59 PM »

This is basically a distilled down version of where I got with another question in the flashing and chipping section.  I felt like perhaps its better suited in this area.

I currently have a 2007 VW New Beetle whereby we do not have the original ECU from the vehicle.  How do I go about making another ME7.1.1 work in this vehicle.

TIA!!!! Hugs, Kisses, and ass slaps.
provide the engine code
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #6 on: December 18, 2021, 03:28:27 PM »

If you could, please link the sticky you were referring to.

Thanks.
http://nefariousmotorsports.com/forum/index.php?topic=6134.0title=
Logged

Giving your mom a tuneup
borderm3
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #7 on: December 23, 2021, 07:10:58 PM »

provide the engine code

BPR, thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)