Pages: 1 2 3 [4]
Author Topic: Adjust speed scale on Audi B6 RB4 cluster  (Read 19790 times)
semaudi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #45 on: December 15, 2021, 02:28:29 PM »

petrol
Logged
semaudi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #46 on: January 03, 2022, 08:49:14 AM »

do you have any C6 FL dumps , I only have one in my collection , I have no comparison

I attached some zipped epproms from preFL C6 , I would try to copy epprom from 0x080 to 0x100 ( did you try? )  , as I noticed a few years ago , i think from 0x000 to 0x080 there is crypted data of Component Protection

I guess you were right it is somewhere between 080 and 100. Did one test today. but it also enables one of the level control led indicators, not sure why
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #47 on: January 03, 2022, 12:21:37 PM »

maybe some codings or adaptation channel are stored in the lines?
Logged
semaudi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #48 on: January 03, 2022, 01:12:55 PM »

looks like what we are looking for is in line 0D0. still need to test.
also I have noticed that instruments has 2 modes.
1. sleeping mode. arrow goes little bit below zero
2. active mode. when door opens or ignition start. arrow goes right at zero.

when I copy 0D0 line making UK to EU. sleeping mode ok, but active mode goes above zero +1 or 2 kmh.
I have moved arrow by hand to zero. will be testing on car when I will have car.
Logged
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)