Pages: [1]
Author Topic: disable ESP mk60  (Read 3598 times)
tao13
Hero Member
*****

Karma: +1475/-1437
Offline Offline

Posts: 514


« on: January 11, 2022, 12:04:55 PM »

Hi all.
I want to disable ESP directly from ecu.
I had an old car crashed with mk60 abs module without esp with coding 1025. Now i have other car woth mk60 abs module but with esp with coding 19970. I checked coding on rosstech, but i can not find a good definitions for both 1025 and 19970.
Somebody can tell me if i will code new car witch have 19970 coding with 1025 , esp will be disable? I think in some conf variables in ecu file can not make this.
Thanks in advance
Logged
_nameless
Hero Member
*****

Karma: +374/-3450
Offline Offline

Posts: 3018



« Reply #1 on: January 11, 2022, 01:24:39 PM »

If I recall correctly  you subtract 2048 from the origin value
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
tao13
Hero Member
*****

Karma: +1475/-1437
Offline Offline

Posts: 514


« Reply #2 on: January 11, 2022, 11:50:59 PM »

No Marty, this is what VCDS show me:
 -1024 coding for broken car(new from 2010 only with ABS , no ASR or ESP , no steering wheel angle sensor)
and
- 19970 for new one (it is older from 2002 with esp and steering wheel angle sensor)
Logged
vvt18
Full Member
***

Karma: +7/-798
Offline Offline

Posts: 146


« Reply #3 on: January 16, 2022, 06:19:15 AM »

Tao13
I tried to code the abs like with 0001025 but it is rejected.Something is wrong with this code
« Last Edit: January 16, 2022, 11:51:56 PM by vladvlad » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.717 seconds with 17 queries. (Pretty URLs adds 0s, 0q)