Pages: [1]
Author Topic: Problem with CRUISE CONTROL after remap  (Read 5440 times)
dv-008
Newbie
*

Karma: +3/-8
Offline Offline

Posts: 15


« on: September 25, 2016, 02:30:53 AM »

i remaped my car with ME7.5 and removed SAI, N112, N249 & Cat.
after remap the cruise control don´t activate

any of this function/map affect to cruise control?Huh

CDHSH     
CDHSHE 
CDHSV       
CDHSVE     
CDHSVSA     
CDKVS       
CDLASH     
CDLATV   
CDGGGTS   
CDLATP     
CLATA
CDLLR       
CDLSA     
CDLSH       
CDLSV       
CDMD       
CDNWS     
CDSLS       
CDTANKL     
CDTES     
CWADRES     
CWERFIL   
CWGRABH   
CWKMMILSCT
CWKONABG   

ref ecu: 06A906032QN
attach the ori file
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: September 25, 2016, 03:45:15 AM »

CWGRABH
code word for GRA control lever

1/3 of this list are not emission codewords
wtf you are doing?
Logged
dv-008
Newbie
*

Karma: +3/-8
Offline Offline

Posts: 15


« Reply #2 on: September 26, 2016, 08:17:13 AM »

CWGRABH
code word for GRA control lever

1/3 of this list are not emission codewords
wtf you are doing?

thanks

i have restored to ori state
CWADRES     
CWERFIL   
CWGRABH   
CWKMMILSCT

question, CDGGGTS  (coolant temperature from instrument cluster)
that function has exactly?

Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #3 on: September 26, 2016, 08:20:45 AM »

You never answered his question about wtf you were doing.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #4 on: September 26, 2016, 09:45:09 AM »

Did you change files (5 spd to 6 spd or other way around)?

That will also cause issues w/ cruise.
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
vladvlad
Full Member
***

Karma: +1/-73
Offline Offline

Posts: 138


« Reply #5 on: January 17, 2021, 11:38:32 AM »

Hi.
I had same problem after swapped 032TL  with 032HS file, cruise not activated.
NVQUOT are setted ok.
Please guys tell me if i must change only CWGRABH to 1 for activation the cruise or must make other setup in vcds?
« Last Edit: January 18, 2021, 06:49:26 AM by vladvlad » Logged
vladvlad
Full Member
***

Karma: +1/-73
Offline Offline

Posts: 138


« Reply #6 on: February 18, 2021, 06:05:06 AM »

I tried to activate with vcds with standard login code. vcds see it active "g" but with error "singanl intermitent".
I specify with 032tl stock code it works!
Logged
azza1234
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


WWW
« Reply #7 on: January 11, 2022, 05:37:00 PM »

I tried to activate with vcds with standard login code. vcds see it active "g" but with error "singanl intermitent".
I specify with 032tl stock code it works!
sorry to bring up the past  Cheesy but ive got the same error signal intermittent with retro fit cruise control what code did you use? i used the
11463 code and it added the "g" but still the intermittent error i also flashed my hn with hs software 
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0s, 0q)