NefMoto > Technical > Flashing and Chipping > ME 7.5 1024kb no vin/no immoid 06A906032HL
Pages: [1]
« previous next »
Author Topic: ME 7.5 1024kb no vin/no immoid 06A906032HL  (Read 2722 times)
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: January 22, 2022, 12:41:22 PM »
Hi guys my first read maybe doesnt work. idk.

i use mpps and 95040 (i will disable only the immo and change later the VIN to my car VIN. I cant see a "login" code like in the posts here in the forum.. maybee well its a 1024kb flash file and not a 512kb flash ?)

can anyone check this file ? i want only a stock - AUM - Manuel gear - NO IMMO

in MPPS i can see ->

check ID ->
Bosch Hardware Number: 0261207438
Bosch Software Number: 1037360644
Vw Software Number: 06A906032HL 0001
System Type Number: 1.8L R4/5VT    G
Flash Program Attempts: 0
Flash Program Counter: 0
ECU Running in Normal Mode

P0171: System Too Lean Bank 1
P0118: Enginge Coolant Temperature Circuit High
P0562: System Voltage Low
P0600: Serial Communication Link

And al lot more -> no power no communication.

i have readed the ecu in this settings:
Speed Options - Medium(Default)

Data Options - Data Only(Default)


When i will check over this 95040tool the file cant read or is damaged ? idk.. Any help? Sry for my horrible english..
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498
« Reply #1 on: January 22, 2022, 01:39:21 PM »
it's not an eeprom read , you uploaded a Flash file from ecu
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #2 on: January 23, 2022, 04:31:02 AM »
Quote from: macxxx on January 22, 2022, 01:39:21 PM
it's not an eeprom read , you uploaded a Flash file from ecu

Is it not the same ?

i want to check the vin and immo which files needded i for this ? the ecu ? Huh
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498
« Reply #3 on: January 23, 2022, 05:52:06 AM »
Flash contains maps etc it's not the same

Use 95040 epprom tool and read epprom
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #4 on: January 23, 2022, 06:11:18 AM »
Quote from: macxxx on January 23, 2022, 05:52:06 AM
Flash contains maps etc it's not the same

Use 95040 epprom tool and read epprom

Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ?
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #5 on: January 23, 2022, 06:43:22 AM »
Quote from: NT1911 on January 23, 2022, 06:11:18 AM
Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ?

okay idont know why but my kkl cable works.. xD Last times this cable wont work driver problems and and and.. but now i have a 1 KB rom file ? ist it right ?

Ok, just to clarify for me:

The data status of 1024 Kbytes is only for performance?

and the small one with 1 Kbytes is only for the immo
?


Is it possible to read out the login of the control unit now?

Or: Can I now change the VIN to any other vehicle as I wish / Or rather change it to my VIN.
« Last Edit: January 23, 2022, 06:46:51 AM by NT1911 » Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498
« Reply #6 on: January 23, 2022, 02:09:05 PM »
Login code is 02190 , just use a normal immo3 adaptation procedure using VCDS ( login to ecu using this code , then channel 50 of adaptation and you put login from your cluster/old ecu )
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 06:28:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)