Please help 06a906032hn 0001 .xdf

Pages: [1]

« previous next »

Author

Topic: Please help 06a906032hn 0001 .xdf (Read 2188 times)

Otakonoko

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Please help 06a906032hn 0001 .xdf « on: January 25, 2022, 10:14:25 AM »

Please provide me with a .xdf file for a SW 0001 if you can.
I am as lost with out it as i can be.
Tbh i searched the forum for it and i can only find 0002 .xdf but it is off by a lot.

Thanks in advance.


	Logged

fknbrkn

Hero Member

Karma: +177/-18
Offline

Offline

Posts: 1401

mk4 1.8T AUM

	Re: Please help 06a906032hn 0001 .xdf « Reply #1 on: January 25, 2022, 10:24:59 AM »

Flash it with 0002 or use beyound compare app to find offset


	Logged

Otakonoko

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Please help 06a906032hn 0001 .xdf « Reply #2 on: January 25, 2022, 10:29:01 AM »

Thanks for the fast reply.

Am i correct if i get a ori 0002 i dont have to modify the eeprom because of the immo to flash and use the 0002


« Last Edit: January 25, 2022, 10:36:53 AM by Otakonoko »	Logged

Juro880

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Please help 06a906032hn 0001 .xdf « Reply #3 on: January 27, 2022, 08:55:10 AM »

Here you are Wink

it´s from 06A906032HS AWP but it is the same as HN 0001 ... it´s not 100% correct, I found some axis bad defined, maybe you will find better file so post it here


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 403

	Re: Please help 06a906032hn 0001 .xdf « Reply #4 on: January 27, 2022, 12:04:58 PM »

Quote from: Otakonoko on January 25, 2022, 10:29:01 AM

Thanks for the fast reply.

Am i correct if i get a ori 0002 i dont have to modify the eeprom because of the immo to flash and use the 0002

No it's not needed just flash 0002 it's fully defined on here


	Logged

Otakonoko

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Please help 06a906032hn 0001 .xdf « Reply #5 on: January 27, 2022, 01:36:10 PM »

Quote from: Juro880 on January 27, 2022, 08:55:10 AM

Here you are Wink

it´s from 06A906032HS AWP but it is the same as HN 0001 ... it´s not 100% correct, I found some axis bad defined, maybe you will find better file so post it here

If it is from this forum then i tried it Sad