Abs and Brake sign on A6 C5 cluster, what activate it?

Pages: [1]

« previous next »

Author

Topic: Abs and Brake sign on A6 C5 cluster, what activate it? (Read 2930 times)

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Abs and Brake sign on A6 C5 cluster, what activate it? « on: March 12, 2022, 04:52:03 AM »

I am trying to figure out what activate big brake warning on VDO 2001 CAN-BUS cluster.
If I discconect ESP/ABS there is a still ABS MIL and brake warning.
Is it possible to code out this from cluster. And is it acrivate only by bremse 1 CAN signal?


	Logged

elektronik13

Full Member

Karma: +10/-36
Offline

Offline

Posts: 204

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #1 on: March 13, 2022, 03:23:02 AM »

Quote from: BlackT on March 12, 2022, 04:52:03 AM

try to do the daily maintenance


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #2 on: March 13, 2022, 03:22:03 PM »

What?


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #3 on: March 15, 2022, 08:58:28 AM »

Signal from ABS/ESP and from only starts that big red brake sign on FIS , I have a bench setup and I connected those pins to +12V or ground ( don't remember exactly but I can check than ) and It dissapears


« Last Edit: March 15, 2022, 09:02:50 AM by macxxx »	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #4 on: March 15, 2022, 06:07:15 PM »

I figure out, I cut can-BUS wires from ESP unit, then brake warning did not show on cluster
After that I cut violet wire from ESP unit and ESP waring from cluster did not show up
Still i got ABS light on dash,, but I can live with that
If I cut ABS wire to cluster gelb/red then again I got warning and big brake sign on cluster


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #5 on: March 21, 2022, 05:17:26 PM »

you should go with 12V or ground on pin from ABS - don't remember to be for sure


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Abs and Brake sign on A6 C5 cluster, what activate it? « Reply #6 on: March 26, 2022, 02:33:19 AM »

Grounding ABS wire(gelb/rot) did the trick, thank you very much Grin


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 06:49:44 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search