Pages: [1]
Author Topic: Trouble reaching desired boost  (Read 1325 times)
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« on: June 17, 2022, 12:58:48 PM »

I have some issues reaching desired boost. Also the car declines the load a lot after 3500-4000 RPM. I did not touch DIMX yet because I am not sure if this is needed in my case?

I would love a second pair of eyes on this log

Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« Reply #1 on: June 17, 2022, 01:38:06 PM »

have you done the tuning on your own?
it makes no sense to request this boost on a k03.

whats modified on the car?
provide a stock log please
Logged
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« Reply #2 on: June 17, 2022, 02:10:30 PM »

have you done the tuning on your own?
it makes no sense to request this boost on a k03.

whats modified on the car?
provide a stock log please

I did. Everyone has to start somewhere.

I read that the k03 are being tuned to 19-21 PSI, I understand they are out of breath at 4000k rpm, it just seemed off when I looked at the logs.. This is whats done on the car;
- CAI
- Sillicone TIP
- 3" DP cat-deleted
- Upgraded SMIC
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)