AGU head on AUQ block

Pages: [1]

« previous next »

Author

Topic: AGU head on AUQ block (Read 9350 times)

giowz0rd

Newbie

Karma: +2/-1
Offline

Offline

Posts: 23

	AGU head on AUQ block « on: June 25, 2022, 10:06:16 AM »

Hello ppl,

I am just giving a chance to restore an 8L here in Brazil - the AUQ head height is lower than the minimum, so, I will have to change it.

There is a lot of AGU heads available for buying, but not even one AUQ. I just found that AGU would fit, but how about the VVT and cams?

If someone already did that, please tell me

Thanks!

Sent from my iPhone using Tapatalk


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: AGU head on AUQ block « Reply #1 on: June 25, 2022, 11:06:07 AM »

Fits fine. Swap VVT unit if you want to keep it.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: AGU head on AUQ block « Reply #2 on: June 26, 2022, 08:40:01 AM »

Some tuning might be required as the AGU is a big port head. Physically it will work though.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

giowz0rd

Newbie

Karma: +2/-1
Offline

Offline

Posts: 23

	Re: AGU head on AUQ block « Reply #3 on: July 01, 2022, 07:43:42 AM »

Thanks everyone!

Updating because I didn’t find it in anywhere:

One day after the post, I just found an AWT head (from Passat, with VVT).

The main problem: Passat engine is longitudinal, A3 engine is transverse - so I will have to adapt the intake and exhaust manifolds.

In your opinion - does it worth the pain to adapt these or finding an AGU/AUQ is better?

Thx!

Sent from my iPhone using Tapatalk


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: AGU head on AUQ block « Reply #4 on: July 01, 2022, 07:56:11 AM »

Find transverse.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

mdz

Full Member

Karma: +12/-1
Offline

Offline

Posts: 73

	Re: AGU head on AUQ block « Reply #5 on: July 01, 2022, 01:33:33 PM »

Both manifolds are bolt on. Roll Eyes


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: AGU head on AUQ block « Reply #6 on: July 01, 2022, 02:35:59 PM »

My girlfriends beetle which is originally AVC transverse engine has a BFB (longitudinal) head too.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: AGU head on AUQ block « Reply #7 on: July 02, 2022, 02:45:45 AM »

Manifolds are bolt on indeed, but do I remember wrong that some tinkering was needed elsewhere?
I remember that it was not completely plug and play for some reason, but it was a very long time ago.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: AGU head on AUQ block « Reply #8 on: July 02, 2022, 03:15:14 AM »

Different mounting size for the fuel injectors - spacers or machining required


	Logged

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: AGU head on AUQ block « Reply #9 on: July 02, 2022, 10:58:18 AM »

Hi. I'm from Brazil too.
I have an BAM head, taken out from an 2002 S3. Small port, with VVT.
PM if you have interest.


	Logged

mdz

Full Member

Karma: +12/-1
Offline

Offline

Posts: 73

	Re: AGU head on AUQ block « Reply #10 on: July 02, 2022, 11:52:45 AM »

Quote from: prj on July 02, 2022, 02:45:45 AM

Manifolds are bolt on indeed, but do I remember wrong that some tinkering was needed elsewhere?
I remember that it was not completely plug and play for some reason, but it was a very long time ago.

There's timing belt/pulley offset difference between 058 (longitudinal only) and 06A (mounted both ways) engines. Other than that, SAI and VVT I dont recall anything else that would not let to swap the heads p&p.
About year ago I swapped bare BFB engine from B7 A4 into 8L A3 by only cleaning some previously unused threads in the block and bolting over everything Roll Eyes


« Last Edit: July 02, 2022, 12:05:59 PM by mdz »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 06:30:56 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search