Pages: [1]
Author Topic: 2.5L Target lambda  (Read 2459 times)
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« on: June 29, 2022, 11:53:34 AM »

hi guys , im working on a golf 2.5 usa me7.1.1 and having some trouble with requested lambda.

there is not much info about this ecu but i found multiple maps in 2d. LAMFA etc.
I tuned a few of this engines but they just repsonse on what im asking for.
the ori lambda request is 0.8958 , i checked it but in the logs the request lambda still at 1.000.

if someone can give me some hints to look for

ori + mod(verry basic) + log(mod) attached

Thnks
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: June 29, 2022, 12:37:02 PM »

worthless log. please obey forum rules

https://nefariousmotorsports.com/forum/index.php?topic=9014.0title=
http://nefariousmotorsports.com/forum/index.php?topic=4094.0title=
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #2 on: June 29, 2022, 12:44:40 PM »

i know you ask for me7logger logs but had some problems with the ftdi cable , sow i used vcds instead sorry, i thought it would have enough info for what the issue is
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: June 29, 2022, 02:57:23 PM »

nope, gonna need to see lambts, lamfa etc.

nobody wants to dig around in a binary either btw.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #4 on: June 30, 2022, 07:43:43 AM »

i understand , fixed the ftdi cable but the file doenst have crc table in me7sum so cant get a ECU file out of it
i will take a look on the me7logger post to see how to work through it
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #5 on: June 30, 2022, 11:17:46 AM »

actually, that 2.5 may not be supported by ME7Logger Sad
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #6 on: June 30, 2022, 11:21:17 AM »

just use bts fueling
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
murfieus
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 48


« Reply #7 on: July 01, 2022, 06:28:04 AM »

@nyet , no unfortunately , file looks more an med9 and acts like it in vcds also.

@_nameless , i tryed also but doesnt reponse on it , target stays 1.000 at WOT (even with knock) , looks like its in limp but dont have any dtc's. i checked sensors etc and values are normal
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)