NefMoto > Technical > Reverse Engineering > 06A906032
Pages: [1]
« previous next »
Author Topic: 06A906032  (Read 2197 times)
Leomgrab
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: August 20, 2022, 06:57:04 PM »


hello all first post here i have questions about a chip on the ecu board.
I attached a few pics,there seems to be a burnt chip near the front on the top.
can anyone help me identify the chip and maybe a reason why it happened.

i opened the ecu to make a cole to flash to a spare {same part number} ecu
i fear the spare might also be burnt i plugged it into the car  Roll Eyes

hopefully correct place THANKYOU
Logged
Leomgrab
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #1 on: August 20, 2022, 07:05:49 PM »
Quote from: Leomgrab on August 20, 2022, 06:57:04 PM

hello all first post here i have questions about a chip on the ecu board.
I attached a few pics,there seems to be a burnt chip near the front on the top.
can anyone help me identify the chip and maybe a reason why it happened.

i opened the ecu to make a cole to flash to a spare {same part number} ecu
i fear the spare might also be burnt i plugged it into the car  Roll Eyes

hopefully correct place THANKYOU


           "wideband 02 sensor driver"
         is that what this is?
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #2 on: August 20, 2022, 07:10:02 PM »
duh i just told you that
Logged
Giving your mom a tuneup
Leomgrab
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #3 on: August 20, 2022, 07:14:03 PM »
     

         Cheesy      Your awesome! I really do appreciate it!     Cheesy
       
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 653
« Reply #4 on: August 21, 2022, 09:52:18 AM »
Quote from: Leomgrab on August 20, 2022, 06:57:04 PM
can anyone help me identify the chip and maybe a reason why it happened.

i opened the ecu to make a cole to flash to a spare {same part number} ecu
i fear the spare might also be burnt i plugged it into the car  Roll Eyes

I've come across this a couple of times.
The reason was electric welding work on the exhaust pipes without disconnected battery.
Unfortunately, most likely not only the chip is damaged, but also the conductors in the inner layers of the 4-layer PCB board.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 01:58:25 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)