Hi, I have 2003 Audi A6 quattro 3.0 it has automatic transmission. I purchased a cluster from ebay, made a cluster harness to read skc. I think what I read is the correct skc can somebody help verify? I will attach the bin file. Now the other problem is the new cluster came out of a car with manual transmission, can this work in my car? can this be adapted to show PDNR123? right now when powered up it says push in clutch to start car. thank you to this forum learned a lot from you guys

Here is the ebay cluster info

Address 17: Instruments       Labels: 4B0-920-xxx-17.LBL
   Controller: 4B0 920 981 N
   Component: KOMBI+WEGFAHRS. VDO D12
   Coding: 02262
   Shop #: WSC 00001
   VCID: 311596C7E831
   WAULT54BX3N048901     AUZ7Z0B2223487

here is the cluster thats in car now info

Address 17: Instruments        Labels: 4B0-920-xxx-17.lbl
   Part No: 4B0 920 981 N
   Component: KOMBI+WEGFAHRS. VDO D12  
   Coding: 02262
   Shop #: WSC 12345  
   VCID: 313F1C72283C1373701-5160
   WAULT64B83N103805     AUZ7Z0C2398485


 

Great that's the pin I read

Thank you