Pages: [1]
Author Topic: EDC16u1 - Limp limiter offset  (Read 1322 times)
-Drex-
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 1


« on: August 27, 2022, 03:20:13 AM »

Under what offset can I find safe/limp mode limiter?

Alternatively, I would like to disable the activation of this mode at all.
I know that this mode is to protect the engine from damage, but I need to do it because the engine
will work outside the car and I want to get "dumb mode" - it should work regardless of errors.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #1 on: August 27, 2022, 04:11:50 AM »

You didn't even post the file.

And there is zero reason to modify this inside or outside or whatever other reason, especially on old EDC16.
It'll probably only go there if the engine is about to explode.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)