Pages: [1]
Author Topic: xdf for 4B0906018R 0261206539 1037354801 1.8t AWT A4 B5  (Read 3051 times)
JeanAwt
Full Member
***

Karma: +8/-10
Offline Offline

Posts: 194


« on: September 26, 2022, 09:56:14 AM »

Hi everyone, I'm a little Noob looking for help finding me7.5 maps from my Awt Thanks in advance I take all info on 018R if attached an original 4B0906018R A6 1.8t I suppose identical to my a4 b5 before 1.8t awt of 2000 that I have not yet extracted I am waiting for my cable I play with unisetting for e85 but I would like to learn and do better the bin a4 b6 and a6 c5 4B0906018R are different but are the definitions compatible??
« Last Edit: October 22, 2022, 10:50:44 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
snuff
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 28


« Reply #1 on: September 28, 2022, 05:18:52 AM »

Here you have one. Some axis are not correct, but tables are OK. For stage 1 its OK. Rest you need to find.
« Last Edit: September 28, 2022, 05:20:49 AM by snuff » Logged
JeanAwt
Full Member
***

Karma: +8/-10
Offline Offline

Posts: 194


« Reply #2 on: September 28, 2022, 09:58:03 AM »

Thanks Snuff
« Last Edit: October 01, 2022, 11:40:04 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +8/-10
Offline Offline

Posts: 194


« Reply #3 on: October 22, 2022, 11:28:52 PM »

hello axes not correct in the xdf it's the units to find (y rpm ect...)? I'm a noob MDBGRGA (torque/gear) there are 6 of them I have a box 5 it's ok?
 i finally read my ecu
A4 b5 1.8t awt 2000.my daily car.
my noob project:
e85 stage 1 ,I want to take my bosch injectors 0280158117 they say 588cc under 4 bar , delete SAI.settings...

I keep reading the wiki...

the base of my files is good to start the setting?xdf/bin?
thanks
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
TeknoFi
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 83


« Reply #4 on: November 12, 2022, 08:47:10 PM »

I corrected some of axis. Couldn't find KFLBTS/KFFDLBTS load axis though Sad



Logged
JeanAwt
Full Member
***

Karma: +8/-10
Offline Offline

Posts: 194


« Reply #5 on: November 12, 2022, 11:31:30 PM »

thank you very much TeKnoFi
« Last Edit: January 02, 2023, 08:52:18 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +8/-10
Offline Offline

Posts: 194


« Reply #6 on: January 02, 2023, 04:53:21 AM »

I corrected some of axis. Couldn't find KFLBTS/KFFDLBTS load axis though Sad



hello,
how to find KFPED?NWPMBBR and VWPMBBR

I also miss TEMIN/VA

and for a hard cut i find : DNMAXH NMAXF FTOMN KFSZT KFTSRL
thank
« Last Edit: January 02, 2023, 06:43:01 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 19 queries. (Pretty URLs adds 0.001s, 0q)