Pages: [1]
Author Topic: DAMOS missing definitions  (Read 1307 times)
Xylynx
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« on: October 03, 2022, 03:09:32 AM »

Can some confirm that some DAMOS files are “incomplete”. For example, I have a .ols file containing a 1.9 BLT file and corresponding DAMOS. Over 5000 maps defined. However, some maps mentioned in the FR are missing. An example off the top of my head is kwhKH_TLKL is missing, but it’s hysteresis value kwhKH_TWHY is there.

Is it just this is an incomplete DAMOS, or is something else going on (name difference between FR and DAMOS?)

Thank you
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260


« Reply #1 on: October 03, 2022, 04:05:12 AM »

All these "damos" was imported with winols, which is just an aftermarket program. Even Winols is really great, there can also be some bugs. Also you never know where the a2l came from, these are no "legal" files, so do never expect they are 100% complete or correct. You do not know where the files leaked and what they was intended for. Maybe just partial data for some supplier or whatever.
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #2 on: October 03, 2022, 08:53:01 AM »

Both things...

Sometimes A2l leaked is "a unfinished" one, sometimes when implementing on a specific model Bosch -or who is calibrating request changes in some functions and only change FR/A2l after.

For example MED17.5.21 can or not have LAMFA, older has... new ones don´t
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)