Pages: [1]
Author Topic: 2.7TT with RS4 K04 not more than 330 g/s?  (Read 1429 times)
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« on: October 26, 2022, 02:25:53 PM »

I have one problem on mine and friends car with same setup. Both cars have K04 from RS4 with RS4 pre-turbo intake(only pipes from Y to turbo), fresh rebuild turbos. Injectors are from audi S3, no CATs and 3 inch downpipe
I can't get more than 320-330 g/s with 95% WGDC, both cars have new OEM N75 and new OEM MAF
I am not talking about MAF limit, only sometimes I hit it, but most of times there is a 310-320 g/s

I will post logs I must find them, but I think you know what I talk about,  is there anything else that is blocking engine to suck more air? Do we need bigger Y pipe, bigger hole on airbox?  

From my understanding stock RS4 have 320-330 g/s at 60% WGDC?

Here is my log, PS. don't look at fuel and ignition, car is running on WMI but not durring this log
« Last Edit: October 26, 2022, 02:30:50 PM by BlackT » Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #1 on: October 26, 2022, 02:37:40 PM »

And here is log from frineds car.

I know that this is too much boost for stock IC, and we don't need more power or boost. Only question is why I need to opet WGDC so much for this airflow
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: October 26, 2022, 02:41:45 PM »

way too many variables, intake restrictions, wg preload, n75, exhaust etc.

who knows?

going by MAF readings is maybe not the best benchmark anyway. How about just pure fats or rpm/sec comparos?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: October 26, 2022, 03:02:43 PM »

N75 are new OEM from audi. WG preload is set to OEM specs , I also add on my car more preload yust in case.

You say intake restriction, you talk about before or after turbos? Or both?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #4 on: October 26, 2022, 03:35:51 PM »

BW rates the K04's at 475 HP
http://nefariousmotorsports.com/forum/index.php?topic=20256.0title=

so you should be able to get more out from them.
I'd look into a hardware issue.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)