You're going to ignore every single rule AND not tell us what ECU you have?

You're on thin ice. Please read all of the stickies and obey forum rules.

It's obvious you didn't bother to read a single rule.

I highly doubt you are boosting with 4.5 bar.. what is your compression 6? fuel toulene?

And if so, that means your turbo matching is bit off. Post some logs or something.

There are logs. Do I have to prove to you that my boost is 4000mbar? Why should I prove it to you? Do you have a solution for my problem?

Are you just going to continue to not read the forum rules?

https://nefariousmotorsports.com/forum/index.php?topic=17551.0title=

You need to patch code obviously.
If you need to ask then you can't do it.
Nobody is going to do it for you either unless you pay them.

Make a request in paid services, offer some money, maybe someone wants to do it for you.
If you don't want to use the map then the easy way is to just NOP the ldrlts_w comparison.
Harder way is to modify the multiplication.

But tbh you should just use standalone ECU because it's drag race car.

Sorry, the link is not opening for me. What rules did I break? I wrote the ECU model me 7.5 block number 4b0906018dc. log posted

What the hell do you mean, why should you prove it ?

You asked for something, if I want you to give me more info or something, then you answer and then you'll maybe get the "solution". If not then not..

I havent looked at that part of bin in IDA , but first thought like prj was just to nope the map result vs the boost comparison or however its done , eliminating hbn basically.

Also man make a proper damn log in a single gear, from low rpm to cut or whatever, that thing is borderline useless, side note I hope you will take a look at your timing values.