it's ok, i test my original bin
C:\Users\JM\Documents>Me7sum\me7sum A4B5AWT.bin A4B5AWT out.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: Me7sum\me7sum [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
Me7sum\me7sum [-v] [-i <config.ini>] -s <inrom.bin>
C:\Users\JM\Documents>me7sum inA4B5AWT.bin outA4B5AWT.bin
'me7sum' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\JM\Documents>cd Me7sum\me7sum
Le chemin d'accès spécifié est introuvable.
C:\Users\JM\Documents>Me7Sum\me7sum A4B5AWT.bin A4B5AWT_out.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'A4B5AWT.bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '40/1/ME7.5/5/4016.31//24b/Dst03o/300500//'
Part Number : '4B0906018R '
Engine ID : '1.8L R4/5VT '
SW Version : '0003'
HW Number : '0261206539'
SW Number : '1037354801'
Step #2: Reading ROMSYS ..
Startup section: word[0x008000]+word[0x00FFFE]
@008038 Add=0x008FA5 CalcAdd=0x008FA5 ADD OK
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@00803c Add=0xA582BF CalcAdd=0xA582BF ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01bf54 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Reading RSA signatures ..
Searching for RSA offset #0...missing
Searching for RSA offset #1...missing
Step #4: Finding CRC table(s) ..
Searching for CRC table(s)...OK
CRC table(s) OK
Step #5: Reading Main Data Checksums ..
Searching for main data CRC pre block...OK
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...OK
Searching for main data checksum offsets...missing
Main CRCs:
0) 0x0183B4-0x0183BD CalcCRC: 1C8A2102
1) 0x010002-0x013FFE @8e1f6 CRC: 17EAE51A CalcCRC: 17EAE51A(r) CRC OK
2) 0x014252-0x017F4E @8e1fc CRC: 248387D0 CalcCRC: 248387D0(r) CRC OK
3) 0x018192-0x01FBDC CalcCRC: 566AA952(r)
4) 0x026A00-0x02FFFC @8e202 CRC: 463FD3F9 CalcCRC: 463FD3F9(r) CRC OK
Step #6: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1fb76 [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 48D2609B
0x00FC00-0x01FFFF CalcChk: 20070A91 CalcCRC: E5F7575A SKIPPED
2) 0x020000-0x0FFFFF
<fffe0> Chk: 4CEF77FA CalcChk: 4CEF77FA OK (i)
Step #7: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
4) <1fc0e> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 71 checksums in A4B5AWT.bin
*** DONE! 0/0 error(s) in A4B5AWT.bin corrected in A4B5AWT_out.bin! ***
C:\Users\JM\Documents>
cmd is not toxic
