NefMoto > Technical > Reverse Engineering > Can simos18 switch from UDS to KWP2000 protocol?
Pages: [1]
« previous next »
Author Topic: Can simos18 switch from UDS to KWP2000 protocol?  (Read 1695 times)
yangbohan
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16
« on: November 06, 2022, 07:23:57 PM »
TTS-MED9.1 only replaces simos18.2 ECU and engine, it can be started after removing imm, but there are some communication protocol failures, can simos18 switch KWP2000 protocol? Can someone do it? I need help and am willing to pay for it?
Logged
cherry
Full Member
***

Karma: +24/-2
Offline Offline

Posts: 246
« Reply #1 on: November 06, 2022, 07:53:37 PM »
Which ecu are you using? From which car? Maybe you need to use some ecu which is from PQ car and not MQB, e.g. S1 8X.
Logged
yangbohan
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16
« Reply #2 on: November 06, 2022, 08:40:10 PM »
I'm using Skoda simos18.2 with PQ35, and now the meter doesn't respond after starting
Logged
prj
Hero Member
*****

Karma: +915/-426
Offline Offline

Posts: 5834
« Reply #3 on: November 07, 2022, 01:17:05 AM »
Quote from: yangbohan on November 06, 2022, 08:40:10 PM
I'm using Skoda simos18.2 with PQ35, and now the meter doesn't respond after starting
This has nothing to do with KWP and UDS whatsoever.

You are using ECU with wrong CAN Matrix.
As is said above, use PQ35 ECU.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
yangbohan
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16
« Reply #4 on: November 07, 2022, 01:23:15 AM »
Is there ECU version information or hardware number?
Logged
prj
Hero Member
*****

Karma: +915/-426
Offline Offline

Posts: 5834
« Reply #5 on: November 07, 2022, 01:24:52 AM »
Open EPC and look like everyone else, don't be lazy. Nobody knows for what market you want it.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
yangbohan
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16
« Reply #6 on: November 11, 2022, 06:25:21 PM »
I found this ECU with EPC, it is indeed the simos18 of the PQ35 model, do I need to replace other accessories? Are there any other suggestions? Thanks!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 17, 2024, 09:05:31 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)