NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > MK6 GLI Fueling Issues after ECU swap
Pages: [1]
« previous next »
Author Topic: MK6 GLI Fueling Issues after ECU swap  (Read 1310 times)
Oleg.melnyk07@yahoo.com
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« on: November 14, 2022, 05:27:46 PM »
Hello everyone I have a MK6 VW Jetta GLI and am running k04 on a custom tune. I swapped the original ecu to the gti’s MED17.1 ECU and after that I have issues with my fuel rail pressure. Only thing that is not connected to the ecu is the evap system(the leak detection pump and the rest). Could that be an issue? I use HP Tuners software ( that was the reason to swap ecu so I am able to use HP Tuners) and if I swap the original ecu back in the car everything works as should, holds 17mpa of fuel pressure all throughout the power band. Thank you in advance
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12269


WWW
« Reply #1 on: November 14, 2022, 05:44:41 PM »
1) this is a DIY forum. We do not support 3rd party tuning suites, and nobody wants to.
2) you completely ignored every single rule and every single sticky
3) you didn't mention if you tried a stock file in the new ECU
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #2 on: November 15, 2022, 02:52:49 AM »
Quote from: Oleg.melnyk07@yahoo.com on November 14, 2022, 05:27:46 PM
Hello everyone I have a MK6 VW Jetta GLI and am running k04 on a custom tune. I swapped the original ecu to the gti’s MED17.1 ECU and after that I have issues with my fuel rail pressure. Only thing that is not connected to the ecu is the evap system(the leak detection pump and the rest). Could that be an issue? I use HP Tuners software ( that was the reason to swap ecu so I am able to use HP Tuners) and if I swap the original ecu back in the car everything works as should, holds 17mpa of fuel pressure all throughout the power band. Thank you in advance
Hp tuners is total shit for vag. Also, swapping ecus from some other model is completely stupid, and won't work. Not to mention the immobilizer won't allow the car to run.
Logged
Giving your mom a tuneup
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 12:52:49 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 16 queries. (Pretty URLs adds 0s, 0q)