Pages: [1]
Author Topic: 8E0909518AS  (Read 2274 times)
The N King
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: November 18, 2022, 12:41:52 PM »

Hi guys Have B6 A4 1.8TQ BEX engined bird here with the ME7.5 8E0909518AS ECU and a bunch of problems.

This car based on my search and the info i managed to get comes with 8E0909518AS, 8E0909518AN, 8E0909518AH, ( 8E0909518AK?? ECUs )

Did a lot of search for a proper XDF for these ECUs but run into problem at this stage.
I tried to find XDF files for all this Ecus and found only 1 file wich has got the most amount of maps and axis datas ect ect properly definied.

The file im working with called 8E0909518AK_0261208230_369307_Stock+LC. This file is far the best.
( but even this file have a bunch missing and undefinied stuff )

All the other files I managed to download for these serial numbers are kind of right mess compared to the one I'm currently working with.

Problem with this file is that KFMIOP Load axis can not be found in there, only the KFMIOP RPM AXIS.

Here are some pics about different XDF files and how for example KFLBTS looks like in the rest of the files. The axis values going through the sky and table values all over the place, except in one of them.

If anyone have a properly definied XDF or a method to find the missing stuff pls let me know. And sorry if it went a bit off, I'm new. Undecided

Pics.

https://ibb.co/k17k7N2

https://ibb.co/1qTXNqR

https://ibb.co/qssmNN0

https://ibb.co/Zm8bd57

https://ibb.co/3FzvJ6C (the only one good so far )
« Last Edit: November 18, 2022, 12:43:44 PM by The N King » Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #1 on: November 18, 2022, 01:03:30 PM »

Immo off and crossflash it , should be good.
Logged
The N King
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #2 on: November 18, 2022, 01:20:35 PM »

Cheers mate thanks for the heads up. I just managed to find the axis data that i was missing. Its not contains the KFMIOP name in it. The KFZWOP that governs the axis im looking for. Lot to learn  Roll Eyes
Best regards.
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #3 on: November 18, 2022, 03:21:20 PM »

Immo off and crossflash it , should be good.
For croshflash BEX ecu he also need eeprom from other ECU
AL 005 is good and have good def
Logged
gremlin
Hero Member
*****

Karma: +179/-7
Offline Offline

Posts: 568


« Reply #4 on: November 18, 2022, 03:37:43 PM »

Below is the firmware list with the 100% same maps definitions as your 8E0909518AS_0003_369011.

8E0909518AK_0004_369307
8E0909518AL_0003_369311
8E0909518AT_0003_369013
8E0909518BA_0001_369017
4B0906018DP_0002_369320

You can use any XDF for above ecu numbers.

Update: Someone posted their xdf on the net. Attached as is.




« Last Edit: November 18, 2022, 04:50:19 PM by gremlin » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.181 seconds with 17 queries. (Pretty URLs adds 0s, 0q)