Pages: [1]
Author Topic: I need full backup ECU ME7.5.1 1.8T AUM 06A906032FC 0261207204 MPC  (Read 931 times)
radzio3747
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Hi, someone have full backup mpc and eeprom for this ECU? Please ECU is dead.Boot and write Flash not working.
.
Logged
Blazius
Hero Member
*****

Karma: +82/-34
Offline Offline

Posts: 1196



« Reply #1 on: November 20, 2022, 08:12:34 PM »

You know the CPU is read only right?
Its basically impossible to kill a me7.5, you sure you do bootmode properly? If not you have hardware damage very likely
Logged
radzio3747
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: November 20, 2022, 09:33:05 PM »

The problem is that I removed pop and bangs from sai and N249.  I counted the checksums by me7sum.  The car started and I revved it to 5000 rpm.  The revs dropped and the car stalled.  Since then, no connection via VCDS.  I run KTAG, write original soft via bootmode and then VCDS does not see the ECU.  Maybe it was a coincidence and something mechanically damaged.
« Last Edit: November 20, 2022, 09:35:07 PM by radzio3747 » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)