Pages: [1]
Author Topic: Om612 standalone  (Read 1564 times)
fineku
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: December 10, 2022, 01:27:06 PM »

Hi!  I am installing an om612 engine with an edc15c6 ecu in a boat. Which wires must be connected to the ecu in addition to the engine wiring harness to make the machine work? The immobilizer should obviously be turned off and the gearbox information changed to manual in the ecu. How to do this? Thank you.
Logged
prj
Hero Member
*****

Karma: +1058/-464
Offline Offline

Posts: 5952


« Reply #1 on: December 10, 2022, 02:55:40 PM »

You should probably solve the issue of "how will it start" before you start "installing engine".
Because else maybe you will have to uninstall it again.

Anyway, for EDC15C6 this should work and probably cheapest solution:
https://shop.carlabimmo.com/en_US/p/Julie-MERCEDES-IMMO-OFF-Emulator/157
Recommend to solder it properly, so it does not fall off in the middle of the sea.

But also just the immo is not the only thing, you also need to convert the pedal to the hand throttle, and a lot of stuff will need to be deleted/modified.
Why not just use a marine engine in the first place?
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)