Good evening @all


Can someone told me why my car makes only burble sound ?

I set all ignition Tables to -24°KW first row belong the rpm and the smallest amount of fueling or mg/stroke

Second tune i tried all maps like the first + the second row to -24°KW but it does not work the maximum amount of Ignition is all the time @-13°KW or -15°KW

I edit all late maps also the latetst possible but it does not work -.- i really stuck... I have now round about 50 Versions it´s the first Golf 7 GTI Performance with 230 PS / HP.

So there is no letter at the end of the ECU Nr. like the newer i know from some people its not possible to set the fueling on and off like me7.5  via A/C or Windows Heating or CC ( i hope thats true ).

Can someone tell me the magic trick or help me? I can provide my tune, my kp file and so on... (no lock for winols )

First file - vag_continental is a vr read of Magic Motorsport tool (Flex)
Second file is my modded file - WinOLS(.....)

Simos has IMPC as function you can invoke on torque change via ENOS(let's say foot off throttle) for selected dirving mode and desirable fuel cuttoff pattern. DSG gearbox uses TQ reduction request trigger IMPC via SCC if to simplify retard ignition/cut fuel for gear change/clutch swap. Over all - Simos has quite lot options play with exaust noise - even on idle

Hello
not possible good pop and bang this binary

need change sw
5G0906259 0007 Updated 5G0906259C 0002 with odisE
 after need correct coding and other ?

because few funcktion not working
Door Control Module .... etc

door modul
acc
start stop
and need update dsg sw version

Hello at all

I found the Solution… the timing of the Valve in the map was not set correct … so now
Its working also i found a great option in ENOS for Temperatur and A/C combo now
The A/C is set to 7000 rpm and Temperatur @70-90 Celsius coolant now its possible to siwtch fueling on and of also the timing is limited from 5000 till 4000 rpm for pops