Andy.G
Newbie
Karma: +0/-0
 Offline
Posts: 8
|
 |
« on: December 24, 2022, 11:50:25 PM »
|
|
|
Hi! Have been trying to immo off my me 7.5 from an apu engine. I think I have succeeded (can’t try it in the car since the engine swap isn’t done) with the immo off.
Now I’m trying to download the flash file but I’m doing something wrong.. I can read the file with galletto in boot mode but getting checksum errors.
==============================================================================
ME7Check v1.08 (c) mki, 06/2004-04/2011
Checking file C:\Users\Hemmadator\Desktop\Me7\me7test2 (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4017.00//PST_SER/DST_SER2//
-> Contents of ECUID data table:
- '0261206050' (SSECUHN)
- '1037350229' (SSECUSN)
- '4B0906018B ' (VAG part number)
- '0004' (VAG sw number)
- '1.8L R4 5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> NO calls of update_data_checksum within calc_data_checksum found
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0xFFFFFFFF
page checksums: invalid start address 0x0082FA
page checksums: invalid start address 0x3F3482FA
-> Found 35 errors!!! *******************************
Have tried using the kkl cable and nefmoto software but it doesn’t work, something like ”memory flash failed” comes up and security access was rejected..
Can I use the flash file from galletto and do a checksum correction or is it wrong?
Thankful for help
|
|
|
|
« Last Edit: December 25, 2022, 12:52:48 AM by Andy.G »
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #1 on: December 25, 2022, 12:06:32 AM »
|
|
|
Why on earth would you
1) use me7check but not me7sum
2) take a picture of your screen with a fucking potato phone instead of just getting a screen shot
3) upload it to google instead of embedding it in post
4) not bother to *just copy/paste the text directly*?
5) entirely omit the binary
You're wasting everyone's time.
anyway, its probably on a riser.
|
|
|
|
« Last Edit: December 25, 2022, 12:08:56 AM by nyet »
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #2 on: December 25, 2022, 12:25:43 AM »
|
|
|
I don’t have access to the computer right now, I’m sorry for wasting your time..
I will fix a screen shot instead. My question was if it’s safe to use the file if me7sum corrects the file?
Sorry again for doing it wrong.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #3 on: December 25, 2022, 12:55:26 AM »
|
|
|
I don't think that file is stock, and/or you have a riser in the ECU, or its not supported by me7check (which i never use).
ME7Sum should not find any errors in your file.
|
|
|
|
« Last Edit: December 25, 2022, 01:04:23 AM by nyet »
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
nyet
|
|
« Reply #4 on: December 25, 2022, 01:00:46 AM »
|
|
|
http://nefariousmotorsports.com/forum/index.php?topic=19796.0title=ME7Sum (v1.1.2-3-gd374-dirty) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'Downloads/Bosch Generic 4b0906018b.Bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '40/1/ME7.5/5/4017.00//PST_SER/DST_SER2//'
Part Number : '4B0906018B '
Engine ID : '1.8L R4 5VT '
SW Version : '0004'
HW Number : '0261206050'
SW Number : '1037350229'
Step #2: Reading ROMSYS ..
Startup section: word[0x008000]+word[0x00FFFE]
@08038 Add=0x00010C65 CalcAdd=0x00010C65 ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01b064 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Finding CRC table(s) ..
Searching for CRC table(s)...OK
CRC table(s) OK
Step #4: Reading RSA signatures ..
Searching for RSA offset #0...missing
Searching for RSA offset #1...OK
Step #5: Reading Main Data CRC/Checksums ..
Searching for main data CRC pre block...missing
Searching for main data CRC/csum blocks...missing
Falling back to default 512k CRC blocks...OK
Searching for main data CRC offsets...OK
Searching for main data checksum offsets...missing
Main CRCs:
1) 0x010000-0x013FFF @6901a CRC: 102ED335 CalcCRC: 102ED335 CRC OK
2) 0x014300-0x017F67 @69020 CRC: 1C214F3F CalcCRC: 1C214F3F CRC OK
3) 0x018191-0x01FBFF @69026 CRC: 3FBFA345 CalcCRC: 3FBFA345 CRC OK
Step #6: ROMSYS Program Pages
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0x7FFFF
@00803c Add=0x3BC8CB CalcAdd=0x3BC8CB ADD OK
Step #7: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1d3b0 [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 499F6629
0x00FC00-0x01FFFF CalcChk: 2B99DE05 CalcCRC: 7DF29131 SKIPPED
2) 0x020000-0x07FFFF CalcChk: FAAE24A2
@7ffe0 Chk: FAAE24A2 CalcChk: FAAE24A2 OK (i)
Step #8: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...OK
1) <14224> 0x024000-0x026555 Chk: 0AEBC490 CalcChk: 0AEBC490 OK
2) <14234> 0x014000-0x014243 Chk: 005DFB33 CalcChk: 005DFB33 OK (i)
3) <14244> 0xFFFFFFFF-0xFFFFFFFF END
Multipoint #1: [2 blocks x <16> = 32 bytes]
Searching for multipoint block descriptor #2...OK
1) <1fc00> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fc10> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fc20> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
..........
Multipoint #2: [34 blocks x <16> = 544 bytes]
Step #9: Looking for rechecks ..
*** Found 41 checksums in Downloads/Bosch Generic 4b0906018b.Bin
*** DONE! 0 error(s) in Downloads/Bosch Generic 4b0906018b.Bin! ***
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #5 on: December 25, 2022, 01:06:49 AM »
|
|
|
Thank you very much! Will try me7sum instead.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #6 on: December 25, 2022, 01:09:23 AM »
|
|
|
Thank you very much! Will try me7sum instead.
Not sure it matters much. I dont know that reading your current file successfully will get you anywhere. |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
nyet
|
|
« Reply #7 on: December 25, 2022, 01:15:31 AM »
|
|
|
==============================================================================
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file Bosch Generic 4b0906018b.Bin (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4017.00//PST_SER/DST_SER2//
-> Contents of ECUID data table:
- '0261206050' (SSECUHN)
- '1037350229' (SSECUSN)
- '4B0906018B ' (VAG part number)
- '0004' (VAG sw number)
- '1.8L R4 5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> No errors found. File is OK. *********************
Note that this is a 512k file, not 1M |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #8 on: December 25, 2022, 02:14:59 AM »
|
|
|
Okey thanks! Will use the generic one instead.
Just wonder if I have done something wrong.. could my eeprom fiddling (immo off) make the flash file go wrong?
|
|
|
|
|
Logged
|
|
|
|
JeanAwt
Full Member
Karma: +10/-12
Offline
Posts: 242
|
|
« Reply #9 on: December 25, 2022, 06:05:11 AM »
|
|
|
what is the purpose ?swap engine?
immo off why?
|
|
|
|
|
Logged
|
A4 B5 avant 1.8T 2000 NO QUATTRO
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #10 on: December 25, 2022, 06:59:26 AM »
|
|
|
Yes, I’m doing a 1.8t in my Porsche 944, hence the immo off  |
|
|
|
|
Logged
|
|
|
|
JeanAwt
Full Member
Karma: +10/-12
Offline
Posts: 242
|
|
« Reply #11 on: December 25, 2022, 07:31:08 AM »
|
|
|
cool 944, to make a racing car?   |
|
|
|
|
Logged
|
A4 B5 avant 1.8T 2000 NO QUATTRO
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #12 on: December 25, 2022, 08:40:08 AM »
|
|
|
Maybe a track day car, but most for Sunday driving. A valve blew on the original motor so I wanted a better engine with more horsepower potential  |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #13 on: December 25, 2022, 01:32:25 PM »
|
|
|
Maybe a track day car, but most for Sunday driving. A valve blew on the original motor so I wanted a better engine with more horsepower potential 2.7t  |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
Andy.G
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #14 on: December 25, 2022, 02:14:17 PM »
|
|
|
2.7t Hehe, too big unfortunately  Thanks for allt the help, merry christmas! |
|
|
|
|
Logged
|
|
|
|
|
