Pages: [1]
Author Topic: r32t with bentley 6.4t ecu?  (Read 229 times)
fknbrkn
Hero Member
*****

Karma: +156/-14
Offline Offline

Posts: 1271


mk4 1.8T AUM


« on: January 24, 2023, 10:40:28 AM »

A quick noob question - why is nobody used bentley 6.4 ecu for vr6t? Im not digged it yet hope for a hint
Logged
prj
Hero Member
*****

Karma: +575/-193
Offline Offline

Posts: 4982


« Reply #1 on: January 24, 2023, 11:39:00 AM »

It has been done.

The main issue IIRC was the can matrix.
Logged

PM's will not be answered, so don't even try.
fknbrkn
Hero Member
*****

Karma: +156/-14
Offline Offline

Posts: 1271


mk4 1.8T AUM


« Reply #2 on: January 24, 2023, 12:16:32 PM »

It has been done.

The main issue IIRC was the can matrix.

I take a look thanks
There is also some kind of pressure sensor at the wg actuator. Is it for diagnose only or ldr uses it?

In general - is it worth?
Logged
prj
Hero Member
*****

Karma: +575/-193
Offline Offline

Posts: 4982


« Reply #3 on: January 24, 2023, 02:29:06 PM »

I have not looked into it in detail or done it myself, I just know it has been done.
Even if there is some sensor, I am sure you can find a way around it.
Logged

PM's will not be answered, so don't even try.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)