NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > DQ250 - 0D9 - max 14 bar without patching?
Pages: [1]
« previous next »
Author Topic: DQ250 - 0D9 - max 14 bar without patching?  (Read 1045 times)
EanDem
Jr. Member
**

Karma: +8/-35
Offline Offline

Posts: 48
« on: January 26, 2023, 05:33:25 AM »
Is that fully blocked by 500nm pach required? Or there is another way to escape?
We can leave coments about mess without correct torque for microslip alone - not a subject to discuss now... 
Logged
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5839
« Reply #1 on: January 26, 2023, 07:03:32 AM »
You need patch for clutch torque calculation, and also there is some limitations on CAN for how high the torque can go.
So ECU needs mods as well (hint: DQ500 can read higher) and the answer exists in S18 FR.

This comment is about MQB.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
EanDem
Jr. Member
**

Karma: +8/-35
Offline Offline

Posts: 48
« Reply #2 on: January 26, 2023, 11:29:43 AM »
Quote from: prj on January 26, 2023, 07:03:32 AM
You need patch for clutch torque calculation, and also there is some limitations on CAN for how high the torque can go.
So ECU needs mods as well (hint: DQ500 can read higher) and the answer exists in S18 FR.

This comment is about MQB.

Yeah.... 0x3FA...
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 23, 2024, 08:11:37 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)