Pages: [1]
Author Topic: Pressure managment Dq250 MQB - any way overcome 14,7 bar without patch?  (Read 1162 times)
EanDem
Full Member
***

Karma: +8/-40
Online Online

Posts: 78



DSG is not mine thing - only out of curiosity:

What i have so far is ECU capable feed TQ up to 500NM(hardcoded limiter) - on TCU side max i can have is 14,7 bar with 1500mA on clutch selenoid for 450nm(suspect deducted tq losses)  Any way to overcome it having in mind ecu has ceiling 500nm? 
Logged
prj
Hero Member
*****

Karma: +1072/-481
Online Online

Posts: 6037


« Reply #1 on: February 20, 2023, 08:18:18 AM »

You already asked about it.
Clutch torque is limited to 500, you need a mod similar to 5120 for that.

Only other options are:
a) Fuck the adaptations
b) Get a DQ500
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)