Pages: 1 ... 3 4 [5]
Author Topic: Need help with my frankturbo tune. logs inside  (Read 47671 times)
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #60 on: July 10, 2012, 11:34:11 PM »

Any consequences to doing this? 

I'm not sure I understand your question. There is no reason to run open loop if you intend to run below the MAP limit unless you are an incompetent "pro" tuner.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #61 on: July 10, 2012, 11:35:24 PM »

So i redid the tune with alot of the modifications in your file, and the car runs much better.  I will log it again.  However I get a chirping sound only taking off in first that I've had since I bought the car, it only happens when it's heated up all the way and only when you take off in first... I'm thinking exhaust hanger or something but it's weird it only does it when its full hot.. Could that be pinging at such a low rpm like that?

Maybe throw out bearing? No clue.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Snow Trooper
Hero Member
*****

Karma: +89/-24
Offline Offline

Posts: 689


WWW
« Reply #62 on: May 11, 2020, 02:42:25 AM »

Did you ever get this figured out?
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #63 on: May 11, 2020, 03:56:07 AM »

Did you ever get this figured out?
If you mean that 'chirping sound' then it's probably compressor surge
Log mlhfm to confirm
Logged
Pages: 1 ... 3 4 [5]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)