Hi, if i have launch control set 4500rpm. In KFTSRL and KFSZT set last row 4500 value=0?
RPM normal limit is 7000, so i must set last row ~6600 or can i set 4500 ?
KFTSRL and KFSZT are dwell tables and setting these tables for spark cut is a hack. However, you can use it for a hard cut rev limiter, but not launch control. You need additional logic for spark cut launch control as the dwell tables are only turning off the spark at the rpm you zero it at and nothing more. Also, it works better if you set ftomn to 0 or .1
