Pages: [1]
Author Topic: Maf enquiry  (Read 1486 times)
Rick81
Full Member
***

Karma: +0/-11
Offline Offline

Posts: 99


« on: April 01, 2023, 12:52:55 PM »

I'm just enquiring here. I have a 2004 Vw Touareg petrol 4.2 v8 engine code axq I have two mafs I'm wondering is it possible to convert to one maf only.

I'm looking at going down the single turbo route.

Kind regards
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #1 on: April 01, 2023, 04:24:10 PM »

Is it possible? yes.
Possible for you do it if you have to ask? no.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #2 on: April 01, 2023, 10:30:05 PM »

Convert to single MAF is only drop in Sea, next problem you will run in to, how you going to deal when load ger over 100%
Logged
Rick81
Full Member
***

Karma: +0/-11
Offline Offline

Posts: 99


« Reply #3 on: April 02, 2023, 01:08:10 AM »

Is it possible? yes.
Possible for you do it if you have to ask? no.

If I don't ask or I don't learn I will never no . If the answer from a pro says yes then I will do some research as to what needs to be done . If a someone was to do it for example is it a big job? . I think I recall asking this question a while back and someone mentioned emissions or something. I don't have sai or cats  . Or even if I had a starting point to look at . I doesnt seem to be a question I see a lot getting mentioned just more upgrading to a
 larger maf

Kind regards
Logged
Rick81
Full Member
***

Karma: +0/-11
Offline Offline

Posts: 99


« Reply #4 on: April 03, 2023, 08:13:05 PM »

It's ok I will try and sus it out
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)