Pages: [1]
Author Topic: me7.5 ecu help  (Read 4039 times)
dream20s
Jr. Member
**

Karma: +0/-9
Offline Offline

Posts: 28


« on: April 01, 2023, 01:04:19 PM »

whats the chances of getting some legit help rather than talkin shit to someone that doesnt know what they are doin an only has a basic understanding???


Sent from my iPhone using Tapatalk
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #1 on: April 01, 2023, 02:25:40 PM »

What are you even asking? There is no question in your post.

The quality of new user posts and threads has gone downhill massively recently.
Logged
dream20s
Jr. Member
**

Karma: +0/-9
Offline Offline

Posts: 28


« Reply #2 on: April 01, 2023, 03:46:05 PM »


basically this is my current ecu until recently i have no throttle responce, the others one has a chip inside from giac but has immo and the other is narrowband from a 225 tt with immo is there anyway i can transfer the tune off my current ecu to one of them, bypass immo on the giac or the immo on the other one , i get the concept of things to an extent but dont kno how to


Sent from my iPhone using Tapatalk
Logged
danksnaks
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 3



« Reply #3 on: April 04, 2023, 09:27:12 PM »

Is it possible for somebody who doesn't know what they're doing? No....
Is it possible for somebody who does know what they're doing? Sure....
Would it be easier and more worthwhile to ditch the GIAC tune altogether and go a different route? Most definitely.
Logged
ecuprog7
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 55


« Reply #4 on: April 05, 2023, 06:21:48 AM »

you can try to desolder flash and eeprom from your bad one and solder them on a spare one with the same O2 measurement. You would be better off if you read them in bootmode and programm to a spare one.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.039 seconds with 16 queries. (Pretty URLs adds 0s, 0q)