NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > mk4 1.8t conversion from automatic to manual
Pages: [1]
« previous next »
Author Topic: mk4 1.8t conversion from automatic to manual  (Read 1537 times)
lambda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« on: April 22, 2023, 01:02:34 AM »
hello to everyone

i have did technically conversion from automatic to manual gearbox, but now i'm having some issues
like no vehicle speed gauge working

previous it was reading from gearbox, now i need a conversion of abs and ecu and cluster , i have already tried eeprom on ecu from a manual ecu and did immo off.. but still i need fix eeprom on cluster and abs?

any one experienced with this here?



thanks.
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #1 on: April 22, 2023, 01:43:24 AM »
VSS reads from the gearbox, unless you have used the wrong gearbox.
Logged
lambda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #2 on: April 22, 2023, 03:39:18 AM »
Quote from: matchew on April 22, 2023, 01:43:24 AM
VSS reads from the gearbox, unless you have used the wrong gearbox.

Yeah, but gearbox is replaced from automatic to manual, also TCU is removed from car..

is there a way to convert reading from abs speed sensors?


Thanks.
Logged
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
« Reply #3 on: April 22, 2023, 07:50:52 AM »
you must modify cluster eeprom and ecu file too.
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387
« Reply #4 on: April 22, 2023, 09:13:44 AM »
Look at schematics...it's a  diferent pin used in MT than tiptronic
Logged
lambda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #5 on: April 22, 2023, 01:52:49 PM »
Quote from: tao13 on April 22, 2023, 07:50:52 AM
you must modify cluster eeprom and ecu file too.
Ecu file? Or ecu eeprom?

Can u modify eeprom on cluster? I can upload it

Thanks


Sent from my iPhone using Tapatalk
Logged
lambda
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #6 on: April 23, 2023, 08:30:37 AM »
Ding!


Sent from my iPhone using Tapatalk
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #7 on: April 24, 2023, 07:57:03 AM »
Quote from: lambda on April 23, 2023, 08:30:37 AM
Ding!


Sent from my iPhone using Tapatalk

You're expecting someone to fix your problem for free? If you're seeking a solution and you don't want to do the leg work (read the fr) and flip a few bits to get speed from CAN for the ECU then make a post in the Wanted section and pay for a solution... The cluster eeprom needs to be edited too, it's not just in the ECU. Also, it has nothing to do with the ECU eeprom, the switch is in flash. OR... You could read the pin out of the ECU and the cluster and run the vss wire directly to the cluster and ECU... If you're playing with the files on your car you should be savvy enough to read pinouts and wiring diagrams.
Logged
Giving your mom a tuneup
MirXas
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 80
« Reply #8 on: April 24, 2023, 08:48:58 AM »
All mk4 gearbox'es, manual or automatic, have an analog speed sender. Your manual gearbox definitely has one, if its from a MK4 (A3, golf 4 etc.), not from a newer generation car.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 04:15:35 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 15 queries. (Pretty URLs adds 0s, 0q)