Pages: [1]
Author Topic: Siemens MSE 3.7R/b ST10F2xx  (Read 1254 times)
A.Dutsov
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: June 18, 2023, 02:20:26 AM »

Can someone look at the files and tell if they are ok for disassembly, or need some other way to take files from this ecu. I have 2 files, from 2 ecus, downloaded on bench. one should be st10f269 other st10273 or 276. When try to load in IDA, files look empty to me ... or something is done wrong in IDA ...
Logged
unicornux
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 83


« Reply #1 on: June 18, 2023, 05:03:27 AM »

Both files seem to be correct.
what you would do to reverse them? Maybe the problem can be solved.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)