Pages: [1]
Author Topic: KFMIOP / KFMIRL load axis load/torque intervention  (Read 291 times)

Karma: +0/-0
Offline Offline

Posts: 2

« on: May 25, 2023, 03:38:12 PM »


Im having issues trying to increase SRL11OPUW (KFMIOP load axis), my stock map only go's up to 140 and I want this to match or exceed my actual load for more control / resolution.

I tried two different approaches for upping the axis:
1# copy the SRL11OPUW, KFMIOP and KFMIRL from a 225 (bam) map and using the me7tunerwizzard to scale KFZWOP/2.
2# generate all maps from me7tunerwizzard

Both result in poor idling, bad paddle response between idle and ~2500 rpm. I can see some kind of intervention happening..

Can anyone please show me what I'm missing / point me in the right direction Huh

Engine is a 1.8T AUQ
NOTE! (for anyone wanting to use the XDF attached) I made most of the XDF myself and some addresses may still be incorrect!
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.041 seconds with 17 queries. (Pretty URLs adds 0s, 0q)