Dq250 auto shifting after hard launch

Pages: [1]

« previous next »

Author

Topic: Dq250 auto shifting after hard launch (Read 2263 times)

andyc1234

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	Dq250 auto shifting after hard launch « on: June 03, 2023, 06:47:31 AM »

Dq250 in manual mode. Shift points set to above the engines rpm limiter. On a hard launch which spins the wheels slightly the gearbox will auto upshift at too low of ab rpm. Not sure if it is an issue with the mechatronics or the mapping


	Logged

Jason

Hero Member

Karma: +38/-0
Offline

Offline

Posts: 500

Breaks everything!

	Re: Dq250 auto shifting after hard launch « Reply #1 on: June 13, 2023, 07:16:45 PM »

I am chasing a similar issue on my 7R. It's definitely calibration related.


	Logged

marchewa

Full Member

Karma: +4/-0
Offline

Offline

Posts: 54

	Re: Dq250 auto shifting after hard launch « Reply #2 on: June 29, 2023, 02:57:37 AM »

I also occur similar problem. I'm able to disable auto upshift when upshift limiters are set above RPM limiters, but when I set upshift limit eg. to 6800 (RPM limiter 7000rpm) gearbox shifts not higher than 6000RPM.

I have a feeling that it is dependent on clutch slip- my guess is that if slip is too big (but still can be unnoticed by driver) gearbox reacts by early upshifting.


	Logged

andyc1234

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	Re: Dq250 auto shifting after hard launch « Reply #3 on: July 07, 2023, 04:13:27 AM »

I have recently done a gearbox adaption and that seems to of solved the problem. Car is now in pieces again having upgraded clutch pack fitted so can't do anymore testing till that is done


	Logged

James1

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 33

	Re: Dq250 auto shifting after hard launch « Reply #4 on: July 07, 2023, 07:59:46 AM »

Uprated clutch pack is pointless on the DQ250. The standard clutch can hold more torque than the gearbox can.


	Logged

prj

Hero Member

Karma: +1098/-518
Offline

Offline

Posts: 6185

	Re: Dq250 auto shifting after hard launch « Reply #5 on: July 07, 2023, 09:14:27 AM »

Quote from: James1 on July 07, 2023, 07:59:46 AM

Uprated clutch pack is pointless on the DQ250. The standard clutch can hold more torque than the gearbox can.

+1 the input shaft and the gears give out way before the clutches do.
Only people who can't tune fit different clutch to it.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 21, 2025, 07:25:13 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search