Pages: [1]
Author Topic: ME7.1.1 4.2v8 disable rear lambda, pops and bangs, hardcut or mappack/xdf need  (Read 1749 times)
ignac112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 2



Hello. I need rear lambda off, pops and bangs after release the gas pedal and hard cut. I try make pops and bangs and hard cut but i cant disable rear lambda
Logged
revoke20
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25



s4wiki know all
Logged
revoke20
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25



Byte  0: EV6    EV3     EV4     EV1
Byte  1: XX     NWS1    LULK    TEV
Byte  2: XX     EKP     AKF     XX
Byte  3: XX     XX      XX      SLP
Byte  4: EV5    SLV     XX      NWS2
Byte  5: HSH2   ULT     EV2     LDR
Byte  6: XX     BKV     HSH     XX
Byte  7: XX     XX      XX      XX
Byte  8: ZUE    ZUE     ZUE     ZUE
Byte  9: ZUE    ZUE     ZUE     ZUE
Byte 10: XX     XX      XX      XX
Byte 11: XX     XX      XX      XX





XX: unknown/unused
ZUE: Ignition coil
NC: Not configured
EV: Fuel injectors
HSH/LSHHK: Rear O2 sensor heater
MIL: Malfunction indicator lamp, OBD
EFLA: Error lamp (non OBD compliant?)
SU/LDR: N75 boost control solenoid
TEV: N80 evap purge regulator valve
AKF: V114 evap flap motor?
LDP: Leak detection pump
EAGR: EGR valve power amplifier
BKV: Brake booster pump
AAV: Shut off valve (Absperrventil vorhanden)
EKP: J17 Fuel pump relay
SLP: J299 SAI pump relay
SLV: N112 SAI solenoid valve
NWS: N205/N208 Camshaft timing control/VVT
ULT/LDUVS: N249 diverter valve (Schubumluftventil)
LULK: N335 airbox flap (RS4)
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 15 queries. (Pretty URLs adds 0s, 0q)