NefMoto > Technical > Flashing and Chipping > MED9 Cross Flashing Compatibility
Pages: [1]
« previous next »
Author Topic: MED9 Cross Flashing Compatibility  (Read 4448 times)
alwaysbrokemk5
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 2
« on: July 07, 2023, 06:25:37 AM »
Hey there,

I have a 2006 GTI (DSG) with the [1K0 907 115 S] factory ECU currently installed. I would like a spare ECU to mess around with and have a spare [1K0 907 115 B] ECU left over from another project.

Would I be able to just bench flash the 115S ECU with the 115B file, and then Immo it off and run it in the car like normal?

From what I understand there is a section of code from 0x6C00 to 0x7003 that would need to be brought over from the original ECU file as well so that the EEPROM Immo doesn't get salty with the code in the flash dump.

Thanks!
Logged
revoke20
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25
« Reply #1 on: October 20, 2023, 06:27:30 AM »
I think my answer was too long but recently I ran into a problem cloning my ECu. So on all the forums they write that it is IMPOSSIBLE to clone an ECU 115L into a 115K and so on. The ECU should be exactly the same 115L and 115L.
But to hell with all the rules. I took my eeprom and my FLASH, loaded my EEPROM into the new ECU, installed it on the car. Next, using ODIS, I loaded a clean FLASH file in .SGO format and everything worked. A 115K box filled with 115L works great.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #2 on: October 20, 2023, 07:52:41 AM »
Quote from: revoke20 on October 20, 2023, 06:27:30 AM
A 115K box filled with 115L works great.

There is no wonder and no miracle  Smiley
because both K and L software using the same hardware ecu number - 8P0907115B
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #3 on: October 20, 2023, 07:55:15 AM »
LOL next thing you know is there's gonna be a metric fuckton of AXX owners here who will have flashed BWA software in their ECU and will be dead in the water with immo locked Smiley but hey what do I know about that?
Logged
I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #4 on: October 20, 2023, 10:28:35 AM »
Quote from: alwaysbrokemk5 on July 07, 2023, 06:25:37 AM
Hey there,

I have a 2006 GTI (DSG) with the [1K0 907 115 S] factory ECU currently installed. I would like a spare ECU to mess around with and have a spare [1K0 907 115 B] ECU left over from another project.

Would I be able to just bench flash the 115S ECU with the 115B file, and then Immo it off and run it in the car like normal?

Flash with what? BDM?
Because you can't enter OBD bootloader if immo is not authorized.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #5 on: November 06, 2023, 04:18:55 PM »
Quote from: prj on October 20, 2023, 10:28:35 AM
Flash with what? BDM?
Because you can't enter OBD bootloader if immo is not authorized.
12 years ago I did port flash on bench after doing immo off by lifting the eeprom with hot air and dumping. I didn't have a bdm tool yet, and now none need bdm because we have bench mode lol. 
Logged
Giving your mom a tuneup
terok
Full Member
***

Karma: +8/-3
Offline Offline

Posts: 134
« Reply #6 on: November 07, 2023, 12:32:49 PM »
Quote
and now none need bdm because we have bench mode

Not entirely true, it's possible to fuck up the ecu so that service mode does not work, but bdm still does.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #7 on: November 07, 2023, 01:50:10 PM »
Quote from: terok on November 07, 2023, 12:32:49 PM
Not entirely true, it's possible to fuck up the ecu so that service mode does not work, but bdm still does.
It wasn't a literal statement, if your tools have gpt protocol Im sure they will do BDM too if you wanna peel it open... My point was 99% of the time these days it's not needed with legitimate tools.
Logged
Giving your mom a tuneup
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #8 on: November 08, 2023, 12:30:04 AM »
Quote from: _nameless on November 07, 2023, 01:50:10 PM
It wasn't a literal statement, if your tools have gpt protocol Im sure they will do BDM too if you wanna peel it open... My point was 99% of the time these days it's not needed with legitimate tools.
As if 99% of the people on here have legitimate tools.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 10:55:03 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)